Lightweight, cardioid mini mic that attaches to instrument or cabinet.

The AKG C 516 ML is a lightweight cardioid mini microphone for use on accordions, guitar speakers, piano and keyboard/organ cabinets. The included screws and double-sided, solvent-free adhesive pads make it easy to install the microphone on your musical instrument or amp exactly where you need it.

Using two C 516 MLs (one on the bass and one on the treble side) and an optional B 29 L battery power supply is an ideal way to mic up an accordion. The C 516 ML is the only version available and can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.

AKG C516ML Miniature Instrument Microphone Features:

• Cardioid instrument microphone with miniature mounting bracket
• High mechanical-noise attenuation
• Including wireless direct adapter for easy use with AKG pocket transmitters
• Detachable microphone cable
• Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers
• Includes 2 double-sided adhesive rubber plates, 3 countersunk bolts (3 x 30 MM), 3 self-tapping screws (2.9 x 13 mm), A 400 adapter, adhesive compound, H 516 Mount Plate, microphone bag, and W44 windscreen

AKG C516ML Miniature Instrument Microphone Includes:

• 2 double-sided adhesive rubber plates, 3 countersunk bolts (3 x 30 MM), 3 self-tapping screws (2.9 x 13 mm), A 400 adapter, Adhesive compound, H 516 Mount Plate, microphone bag, and W44 windscreen

Need an unobtrusive way mic a speaker cabnet or an instrument that moves? The C516ML is your answer.

AKG C516ML Miniature Instrument Microphone Specifications:

• Polar pattern: cardioid
• Frequency response: 60-20 kHz
• Sensitivity: 5 mV/Pa (46 db)
• Maximum sound pressure level: 130/132 dB SPL, (for 1%/3% THD)
• Equivalent noise level: 31 dB-A
• Signal/noise ratio (A-weighted): 63 db
• Impedance: <=200 ohms
• Recommended load impedence: >=2000 ohms
• Current consumption: approx. 2 mA
• Power requirement: B 29 L battery power supply, or the MPA V L adapter,
• AKG WMS Series bodypack transmitters
• Connector: 3-pin male XLR
• Cable length: 5 ft. (1.5 m)
• Finish: matte black
• Dimensions (length x diameter): 9.3" x 1.9", 235 mm x 47 mm (microphone only)
• Net weight: 1.6 oz, (46 g)