The ART SplitCOM Mic Splitter/Combiner lets you run 2 mixers at once or any other application requiring the ability to split the signal from the source.

Say you are running 2 mixers at once perhaps one for the monitor system and one for the main PA (or one for a broadcast feed and one for the PA). If a performer wants his/her mic split into a powered monitor and the PA, you will need the ability to split the signal from the source so that the signal can go both ways. It is also important that the output of the source encounters the right impedance.

If you simply used a Y adapter, signal strength and quality would be lost. For this reason, the SplitCOM professional splitter has a built-in transformer. Since you may be splitting the balanced output of an instrument amp or preamp, another consideration is hum caused by a ground loop. The SplitCOM splitter box also features a ground lift switch to reduce that problem.

ART SplitCOM Mic Splitter/Combiner Specifications:

• OutputÿLevel Transformer-balanced, 600 ohm male XLR
• InputÿImpedance 600 Ohms (balanced)
• OutputÿImpedance 600 Ohms (balanced)
• InputÿConnectors Female XLR (Balanced)
• OutputÿConnectors Male XLR Thru output
• GroundÿLift Switch
• Power Passive
• Dimensions 3.75x2.875x1.5 inches (90mm x 75mm x 40mm)
• Weight 1lb (454g)

ART SplitCOM Mic Splitter/Combiner Features:

• Run 2 mixers at once
• Serves for any application requiring splitting the signal from the source
• Transformer maintains signal strength and quality
• Ground lift eliminates hum

Click or call now to order!