Precise equalization in a single rack space unit.
The Ashly MQX-2150 is a 15-band graphic equalizer that features 2 channels of fifteen-band 2/3 octave
equalization and a switchable high-pass filter in 1RU. MQX Series EQ's use precision filter design and summing circuitry,
with each filter exhibiting true constant "Q" response. The center-detented position of each fader acts as an on/off switch
for its filter (to minimize any possible degradation to signal noise levels), ensuring absolutely flat response and high signal-to-noise
ratios.
Instead of 20mm plastic faders typically used by other manufacturers, Ashly uses a custom-manufactured 25mm
slide faders. The additional range and accuracy allows ±15 dB of boost or cut adjustment on each individual filter
(an Ashly exclusive in this class of product).
Input and output connections include 1/4" TRS phone jacks, as well as
standard locking XLR's. Ashly's servo-balanced output circuitry maintains unity gain even if pins 2 or 3 are connected directly
to ground. The power supply is a universal switching power supply which operates from 90 - 240VAC, 50/60Hz with the power
switch located on the rear panel. MQX Series equalizers are covered by an exclusive Five Year Worry Free Warranty.
APPLICATIONS:
Monitor Systems; Front of House Sound Systems; Installations Requiring Fixed EQ; Recording/Broadcast Studios; DJ Systems
Ashly Audio MQX-2150 Dual 15-Band Graphic Equalizer Features:
- Constant "Q" design for low ripple and minimum interaction
- Precision Wein Bridge Filters
- Balanced XLRs and 1/4" TRS Jacks on Inputs and Outputs
- Selectable 15dB or 6dB Range
- 18dB/Octave High Pass Filter
- Low Noise Design
- Silent In/Out Switching
- Signal Present and Clip LEDs
- 25mm Fader with Center-Off Position
- 5-Year Worry-Free Warranty
A well designed unit that does more, better. Order today.
Ashly Audio MQX-2150 Dual 15-Band Graphic Equalizer Specifications:
- Input Type: Active Balanced
- Input Impedance: 20K ohm Balanced, 10k ohm, Unbalanced
- Max. Input Level: +23dBu
- Output Type: Pseudo-Balanced (single ended signal with balanced impedance)
- Output Impedance: 200 ohm Balanced, 100 ohm, Unbalanced
- Max. Output Level: +23dBu
- Connectors: 1/4" Phone jack and XLR
- Frequency Response: ± .25dB
- Total Harmonic Distortion: < .01% @ +20dBu
- IM (Intermodulation) Distortion (SMPTE): < .01% @ +20dBu
- Output Hum And Noise: < -96dBu (20Hz-20kHz unweighted)
- Crosstalk: < -90dB, 20Hz-20kHz
- Filter Type: Constant Q/Wein Bridge
- Bandwidth: 1/3 octave
- Tolerance: ±3%
- Range: ±6 or ±15 dB
- Subsonic Filter: 18dB/octave @ 20Hz, (internally switchable)
- Power Requirements: Nominal Voltage: 90-125VAC, 50-60Hz, (240VAC available); Minimum Voltage: 90VAC
- Power: 10W
- Shipping Weight: 8 lbs
- Dimensions: 19"L x 1.75"H x 6"D