|
|
|
|
A powerful tool for live sound control.
The Ashly Protea 4.24C is a 4-input, 8-output speaker processor coupled with a user interface that is
so easy you won't even need the manual to set up your system. The Protea System II 4.24C Digital Crossover/System Processor
has all the audio processing tools needed for precise crossover and sound control. Each input allows you to control gain,
delay and six parametric, low or high shelf filters. In addition to setting crossover frequencies, each output may be assigned
to any one or a combination of inputs, allows you to program four parametric, low or high shelf filters, delay for time delay
adjustments, output gain, reverse polarity and a compressor/limiter for speaker protection. All this in a one rack space with
XLR input and output connections. You may also program and control the 4.24C with Ashly's Protea System Software (Windows™
95, 98, 2000, XP and NT platforms), AMX NetLinx, MIDI or SIA-Smaart software. In all, the Protea 4.24C is a powerful tool
for use in fixed installation and live sound applications.
Ashly Audio Protea 4.24C Speaker Processor Features:
- One Rack Space
- Four Inputs — Eight Outputs
- Outputs Assignable to Any Input
- Crossover, EQ, Delay and Limiter
- Functions
- Linkwitz-Riley, Bessel and
- Butterworth Filters
- 12, 18, 24 and 48dB/Octave Slopes
- Parametric EQ: Full Bandwidth, 1/64th to 4 Octave Range
- Input and Output Delay
- Limiter on Each Output
- Intuitive User Interface
- Programmable by Front Panel, PC or
- MIDI
- Individual Input and Output
- Metering
- Balanced Inputs and Outputs
- XLR Audio Connections
- Password Protected System Security
- Five Year Warranty
Order today and have your processing all in once unit.
Ashly Audio Protea 4.24C Speaker Processor Specifications:
- Input: Active Balanced, 18 Kohms
- Max. Input Level: +20 dBu
- Output: Active Balanced, 100 ohms
- Max. Output Level: +20 dBu
- Frequency Response: 20 Hz-20KHz, ±0.25 dB
- THD: <0.01% @1 KHz, +20 dBu
- Dynamic Range: >110 dB (20 Hz-20 kHz) unweighted
- Output Noise: <-90 dBu unweighted
Eq Filters:
- Number: 6 per Input, 4 per Output Selectable
- As:
- Parametric
- Bandwidth: 1/64th Octave to 4 Octave
- Range: +15/-30dB, 0.1 dB increments
- Resolution: 1/24th Octave
- High-Shelf
- Slope: Selectable 6 or 12dB/Octave (1 High
- Shelf, 2 High Shelf)
- Frequency Range: 19.7Hz to 2KHz
- Range: +/-15dB, 0.1dB increments
- Low-Shelf
- Slope: Selectable 6 or 12dB/Octave (1 Low
- Shelf, 2 Low Shelf)
- Frequency Range: 3.1886KHz to 20.1587KHz
- Range: +/-15 dB, 0.1dB increments
Crossover Filters:
- High Pass Filter
- Type: Linkwitz-Riley, Bessel, Butterworth
- Slope: 12, 18, 24 and 48dB/Octave
- Frequency Range: Off to 21.983.3KHz, 1/24 Octave
- Low Pass Filter
- Type: Linkwitz-Riley, Bessel, Butterworth
- Slope: 12, 18, 24 and 48dB/Octave
- Frequency Range: Off to 21.983.3KHz, 245 step
- Increments
Delay:
- Input Maximum Delay: 682.5ms
- Output Maximum Delay: 21.33ms
- Increment: 20_s
- INPUT And OUTPUT GAIN:
- Range: +12/-40dB, 0.1dB increments
Polarity
- 0 or 180 degrees (selectable in the Output Gain Stage)
Compressor/Limiter:
- Threshold: -20dBu to +20 dBu, 1.0dB increments
- Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2., 3, 4, 6,
- 10, 20, Infinite:1)
- Attack: 0.5 ms to 50 ms per dB
- Release: 10 ms to 1 sec. per dB
Processor:
- Input A To D: 24 bit
- Output D To A: 24 bit
- Processor: 24 bit, 56 bit accumulator
- Sample Rate: 48 kHz
- Propagation Delay: 1.46 ms
Other:
- SIGNAL AND CLIP Leds: Inputs: -20/Mute, -10, 0, +10, Clip
- (dBU or VU); Outputs: -20/Mute, -10, 0, Limit; Threshold, Clip (dBu or VU)
- Rs232 Cable Distance: 1300ft (Max)
- Midi Cable Distance: 500ft (Max)
- Power Requirements: 80 - 260VAC, 30W max
- Shipping Weight: 10lbs
- Dimensions: 19.0"L x 1.75"H x 6.0"D
- I/O Connectors: XLR
- Environmental: 40-120 deg. F, noncondensing
- Notes: 0dBu = 0.775V RMS
|
|
|
|