|
|
|
|
|
Dual channel, dual mode.
The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and
Fine filter width settings on each channel.
The FCS-960 provides 2 channels in 3U of rack space. Constant Q-filters
with filter-bypass center taps are controlled by high grade, 45mm faders with molded polymer fader knobs that eliminate visual
parallax error even under low light conditions.
Also included are sweepable/switchable Hi-pass filter, Gain control
and electronic balanced inputs and outputs.
BSS Audio FCS-960 Graphic Equalizer Features:
- Long 45mm fader travel for precise adjustment and control
- Center detented fader with electrical center tap for true 0dB setting
- Advanced constant Q filter topography for improved accuracy at all fader settings and excellent sonic transparency. Selectable
normal or fine filter response
- Continuously variable high pass filter, with by-pass switch
- Gain control fro system loudness normalization
- Peak clip LED to give advance warning of signal overload
- Channel bypass selection and power fail bypass by relays
- Electronically balanced inputs and outputs
- Proprietary design fader knob provides positive feel with ample finger room, virtually eliminates visual parallax errors
even under low ambient light conditions
Order today and EQ more precisely.
BSS Audio FCS-960 Graphic Equalizer Specifications:
- Input Section
- Impedance: 10k Ohm, Electronically Balanced:
- Max. Input Level: +20dBu
- Connector: XLR331 or equivalent
Output Section
- Output: Electronically Balanced & floating
- Max. Output Level: +20dBu into 600 Ohms
- Connector: XLR332 or equivalent
System Performance
- Frequency Response: +/0.25dB 20Hz to 20kHz
- Distortion (THD): <0.005% 20Hz to 20kHz @+4dBu
- Output Noise (flat): <90dBu, 22Hz to 22kHz, unweighted
- Channel Separation: Better than 80dB from 20Hz to 20kHz
- Gain Control Range: +/10dB
- Peak Indicator: +18dBu
- Bypass:Passive failsafe bypass relay
Filters
- Type: MFB Constant Q
- Frequencies Per Channel: 30 off, on 1/3 octave ISO centres, 25Hz to 20kHz
- Boost/Cut Range: Nominal +/10dB *
- Mode: Selectable normal or fine response
- High Pass Filter: 18dB/octave Butterworth, 20Hz to 250Hz
General
- Power Requirements: AC 30VA 50/60Hz, selectable 90/120v or 190/250v. IEC AC power cord.
- Dimensions: 3U 19 " x 5.25" x 8.9" (482mmx132mmx227mm)
- Weight: 11lbs gross shipping (6kg)
|
|
|
|
|
|
|