Online Rock: Empowering Musicians  
OnlineRock Equipment Store  




View Previous Product in our Crown Store View Next Product in our Crown Store

Click here to buy Crown XTI 2000 Power Amplifier Restock by Crown.
Crown


Availability: In-Stock and Ready To Ship!
List Price: N/A

Our Price: $499.00
At Musiciansfriend.com on December 01, 2010.

Speaker presets, an LCD screen, and a universal power supply!

1,000W/ch @ 2 ohms, 800W/ch @ 4 ohms, 475W/ch @ 8 ohms, 2,000W bridged mono @ 4 ohms, 1,600W bridged mono @ 8 ohms.

The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon®, and binding-post outputs, short-circuit protection and more.

Crown XTI 2000 Power Amplifier Restock Features:

  • Integrated proprietary DSP with LCD front panel display
  • Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
  • Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
  • Extremely versatile, handling a wide range of speaker impedances and outputs
  • Switch-mode universal power supply
  • Speaker presets for crossover frequencies, EQ, limiting, and delay
  • All products fill 2U rack spaces and weigh under 17 pounds
  • Speakon® and binding post outputs, XLR inputs and loop-thrus
  • Comprehensive LED status per channel
  • 3-year, no-fault, fully-transferable warranty

Accurate, uncolored sound for pro audio production! Order today

Crown XTI 2000 Power Amplifier Restock Specifications:

  • Voltage Gain at 1kHz, 8 ohm rated output:
  • XTi 1000: 30.5dB _XTi 2000: 32.9dB_XTi 4000: 34.2dB

    Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms

    Phase Response (at 1 watt, 20 Hz to 20 kHz): ±15°

    Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode

    Sensitivity: 1.4V

    Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): _105 dB (A weighted).

    Damping Factor: Better than 500 from 20 Hz to 500 Hz.

    Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz.

    Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz._Input Stage: Input is electronically balanced and employs precision 1% resistors.

    Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.

    Maximum Input Signal: +22 dBu typical

    AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V _50/60 Hz

    AC Line Current:
  • XTi 1000: 6.5A_XTi 2000: 6.9A_XTi 4000: 8.0A

    At Idle: Draws no more than 90 watts.

    Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).

    DSP Section

    EQ: 4-band paragraphic per channel, boost/cut ±12 dB. Also adjustable high and low shelving filters

    Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave. High and low shelving filters, one per channel

    Delay: For signal alignment of driver; 5 mS total delay

    Subharmonic Synthesizer: Adds low-frequency content

    Output limiter: Prevents clipping

    Presets: 10 user speaker presets

    Front Panel Controls and Indicators

    Level: Detented rotary level control, one per channel

    Power Switch: On/off switch applies AC power to the amplifier

    Sel/Prev/Next Buttons: Three buttons near the LCD screen are used to access menu items

    LCD Screen: Backlit liquid crystal display shows speaker presets

    Signal Indicator: Green LED, one per channel, flashes when a very low-level signal is present at input

    —10 Indicator: Green LED flashes when output signal exceeds —10 dB below clip.

    —20 Indicator: Green LED flashes when output signal level exceeds —20 dB below clip

    Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio

    Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion

    Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or excessive temperature conditions

    Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power

    Rear Panel Controls and Connectors

    AC Line Connector: NEMA 5-15P (15A)

    Input Connector: XLR, one per channel

    Link/Out Connector: Loop-thru signal from input connector for linking

AboutOnlineRock Records Press RoomContactAdvertisePrivacyShop