Designed for demanding speech applications.
The Electro-Voice RE16 microphone is a Variable-D® dynamic supercardioid mic designed for the most
exacting professional use. The blast filter, an integral part of the EV RE16 mic, permits handheld and outdoor use without
"P-pops" or excessive wind noise. Utilizing the Variable-D® design the RE16 mic features a directional characteristic
independent of frequency. The result is a microphone that generates little off-axis coloration while providing the greatest
rejection of unwanted sounds. A supercardioid mic, the Electro-Voice RE16 provides its greatest rejection at 150° off-axis.
(Supercardioid microphones provide greatest rejection in the horizontal plane when the microphone is tilted in its most natural
position ¬30° from horizontal, as on a boom or floor stand.)
An easily operated "bass tilt" switch on the
RE16 mic corrects spectrum balance for boom use and other longer-reach situations. A hum-bucking coil and screw-machined
steel outer casing provides 25 dB of hum rejection. Hum pickup level is -125 dBm (re: .001 gauss field). Using the mechanical
nesting concept of design, by means of which the internal transducer parts are nested one within another, the RE16 transducer
is a nearly solid mechanical structure that is highly resistant to damage from mechanical shock. The Memraflex™ grille
screen resists deformation. The exclusive nonmetallic Electro-Voice Acoustalloy® diaphragm is virtually unaffected by
extreme atmospheric conditions. A carefully designed steel outer case provides additional mechanical protection. The finish
is non-reflecting fawn beige.
Electro-Voice RE16 Supercardioid Handheld Dynamic Microphone Features:
- Reduced proximity effect
- Effective internal pop protection
- Little off-axis coloration
- Hum-bucking coil and steel case offer
- excellent hum rejections
- Bass roll-off switch
Designed for exacting professional use. Order today.
Electro-Voice RE16 Supercardioid Handheld Dynamic Microphone Specifications:
- Element: Dynamic
- Polar Pattern: Supercardioid
- Impedance, Low-Z balanced: 150 Ohms
- Connector Type: 3-pin XLR
- Mic Type: Handheld
- Wired/Wireless: Wired
- Finish: Fawn Beige
- Case Material: Steel
- Weight Net: 227 g ( 8.01 oz )
- Dimensions (Height X Max Diameter): 187 x 45 mm (7.36" x 1.77")
- Microphone Applications: Speech
