Online Rock: Empowering Musicians  
OnlineRock Equipment Store  




View Previous Product in our Eminence Store View Next Product in our Eminence Store

Click here to buy Eminence Commonwealth 12 225W Guitar Speaker by Eminence.
Eminence
Features: 9.25
Quality: 10.00
Value: 10.00
Overall: 10.00
(Based on 3 ratings)
Click here to read customer reviews.

Availability: In-Stock and Ready To Ship!
List Price: N/A

Our Price: $134.99
At Musiciansfriend.com on December 01, 2010.

The Eminence Commonwealth 12" Guitar Speaker delivers warm and rich tone that is very clean and well-defined. This Eminence speaker has a very full and smooth presence. Very little cone break-up, but likes Overdrive. Clean, warm, full, non-distorted, unadulterated guitar tone for all genres.

Eminence Commonwealth 12" 225W Guitar Speaker Features:

  • Voice Coil Diameter: 4", 101.6mm
  • Magnet Weight: 109 oz.
  • Power Rating.: 225W
  • Sensitivity: 100

Put this replacement speaker in the cart.

Eminence Commonwealth 12" 225W Guitar Speaker Specifications:

  • Specification
  • Nominal Basket Diameter: 12", 304.8mm
  • Nominal Impedance*: 8 ohms
  • Power Rating**: 225W
  • Resonance: 50Hz
  • Usable Frequency Range: 50Hz-4kHz
  • Sensitivity***: 100
  • Magnet Weight: 109 oz.
  • Gap Height: 0.29", 7.2mm
  • Voice Coil Diameter: 4", 101.6mm

    Thiele & Small Parameters
  • Resonant Frequency (fs): 50Hz
  • DC Resistance (Re): 6.34
  • Coil Inductance (Le): 0.46mH
  • Mechanical Q (Qms): 6.61
  • Electromagnetic Q (Qes): 0.35
  • Total Q (Qts): 0.33
  • Compliance Equivalent Volume (Vas): 90 liters / 3.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 36cc
  • Mechanical Compliance of Suspension (Cms): 0.24mm/N
  • BL Product (BL): 15.7 T-M
  • Diaphragm Mass inc. Airload (Mms): 43 grams
  • Efficiency Bandwidth Product (EBP): 143
  • Maximum Linear Excursion (Xmax): 0.7mm
  • Surface Area of Cone (Sd): 519.5 cm2

    Mounting Information
  • Recommended Enclosure Volume:
  • Sealed: Acceptable
  • Vented: Acceptable
  • Overall Diameter: 12.28", 312.0mm
  • Baffle Hole Diameter: 11.08", 281.3mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket:
  • Mounting Holes Diameter: 0.27", 6.8mm
  • Mounting Holes B.C.D.: 11.69", 297.0mm
  • Depth: 5", 127mm
  • Net Weight: 21.5 lbs., 9.8 kg
  • Shipping Weight: 23.2 lbs., 10.5 kg

    Materials of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Die-cast aluminum basket
  • Paper Cone
  • Cloth cone edge
  • Aluminum dust cap

    *Please inquire about alternative impedances.
  • **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  • ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
  • Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
  • calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
  • fiberglass on all six surfaces (three with custom-made wedges)


AboutOnlineRock Records Press RoomContactAdvertisePrivacyShop