MIDI control of functions on amps equipped with 1/4" footswitch jacks.

The Z-11 MIDI Switcher by Engl was designed for accessing specific switchable functions of amps via MIDI that are switched via conventional 1/4" jack/plug-compatible footswitches. Settings are saved to 100 MIDI program locations. You also have the option of selective access via 8 poly channels or comprehensive transmission of MIDI program change commands 0 to 100 via Omni mode.

The Engl MIDI Switcher is equipped with 6 switching loops, whereby 4 circuits are accessible via two 1/4" mono jacks. This makes it much easier to connect devices equipped with 1/4" stereo jacks for use with dual footswitches. When it is used in conjunction with the Engl MIDI Footcontroller Z-12, the power for the footcontroller is routed from the MIDI Switcher via the MIDI cable.

Easy to operate and offers loads of comfortable handling options.

Engl Z-11 MIDI Switcher Features:

• 100 presets
• MIDI Omni channels or 8 specific channels
• 6 switch loops

Order today for faster, more flexible switching options.

Engl Z-11 MIDI Switcher Specifications:

• Power supply: External power pack 7-15 volts AC or 9-20 volts DC, approx. 300 mA
• Maximum power consumption: approx. 140 mA. Power supply via the MIDI cable Pin 1 and Pin 2 can be activated for the ENGL MIDI Footcontroller Z-12
• System: Controller AT 89C51 with internal 4k Flash memory for software (protected), 12 Mhz system clock
• Memory: EEprom, no backup battery required
• Dimensions: 18 x 4 x 11 cm, the switcher can be installed in a one-rack space 19" rack system by means of the optional rack front panel (sold separately)
• Weight: approx. 1 kg