The ultimate portable preamp!
This 12V version of the Lunatec V3 from Grace Designis based on the industry standard Lunatec V2. Designed
to deliver accurate, musical preamplification with high-definition A/D conversion in a bombproof, portable, DC-powered package.
Sound designers, remote engineers, classical engineers, concert tapers, or anyone with a portable recording system will be
stunned by the depth, clarity, and realism the Lunatec V3 delivers.
Featuring Grace Design's ultralow distortion, 24-bit
A/D converter. Flexible outputs include S/PDIF (RCA) and 2 sets of AES3 (XLR). Sample rates of 44.1, 48, 88.2, 96, 176.4,
and 192kHz are supported. Both single- and dual-wire 176.4 and 192kHz AES/EBU modes are provided via a pair of XLR connectors.
Also includes an analog noise-shaping dither circuit (ANSR).
Grace Design Lunatec V3 2 Channel Mic Preamp (12V) Features:
- 12V operation
- 24-bit A/D converter
- Discrete operation
- S/PDIF and AES3 outs
Take it anywhere, record anything, in crystal-clear audio. Order today.
Grace Design Lunatec V3 2 Channel Mic Preamp (12V) Specifications:
- A/D CONVERTER
- Dynamic range:
- 44.1kHz-192kHz, 22Hz-20kHz bandwidth @107dB
- 44.1kHz-192kHz, A-weighted @110dB
THD+N:
- 44.1kHz-192kHz, -3dBFS, 22Hz-20kHz bandwidth @-101dB
Frequency Response:
- Fs 44.1kHz +0.1/-0.4dB @20Hz-21kHz
- Fs 48kHZ +0.1/-0.4dB @20Hz-22kHz
- Fs 88.2kHz +0.1/-0.4dB @20Hz-42kHz
- Fs 96kHz +0.1/-0.4dB @20Hz-45kHz
- Fs 176.4kHz +0.1/-0.4dB @20Hz-75kHz
- Fs 192kHz +0.1/-0.4dB @20Hz-82kHz
AMP
- Frequency Response
- @60dB gain -3dB: 6Hz-250kHz
THD+N
- @20dB gain +20dBu out: 0.0011%
- @40dB gain +20dBu out: 0.0011%
- @60dB gain +20dBu out: 0.0046%
Intermodulation Distortion
- @40dB gain +20dBu out
- SMPTE/DIN 4:1 50Hz,7k: <.0025%
Noise - Referered to Input
- @60dB gain 50 Ohm source: <-130dB
Phase Deviation
- 50Hz-20kHz: <8 degrees
Crosstalk
- Either Channel: -109dB
CMRR
- @60dB gain, 3.5Vcm, 1kHz: 70dB
- @60dB gain, 3.5Vcm, 10kHz: 80dB
- Output CMRR: 60dB
Maximum Output Level
- Balanced: +25dBu
- Unbalanced: +19dBu
Impedance
- Input: 3k
- Output: 300
- Minimum Load Impedance: 600
Power Consumption
- 6-12VDC (depending on A/D settings and microphone type)
- 600-1000mA
- 2.6 lbs
- 8.25"W x 1.7"H x 5.5"D