|
|
|
|
4-channel USB audio/MIDI interface with dbx preamps, Lexicon reverb, and more.
Brilliantly designed, the I-ONIX U42S recording interface from Lexicon fits where it makes the most
sense, between your keyboard and monitor. Lexicon understands you care passionately about your music, and that it's more than
just a pastime, which inspired them to create the I•ONIX U42S, putting all monitor and input level controls at your fingertips.
Featuring dbx microphone preamps on every channel, the I•ONIX series recording interfaces are more than equipped
to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee
stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D - D/A converters ensure
pristine 24-bit/96kHz audio to capture every subtle detail of your performance.
The included Pantheon II VST/AU reverb
plug-in features 6 reverb types with 16 adjustable parameters, as well as 35 factory presets that range from Vocal to Live
Sound and Special Effects. It's easy to complete your mix and make your music sound its best with these exquisitely rich,
full reverbs that have made Lexicon famous.
Also included with the Lexicon U42S is a software suite featuring Steinberg's
Cubase LE4 and Toontrack EZdrummer Lite.
Lexicon I-ONIX U42S USB 2.0 Audio/MIDI Interface Features:
- USB 2.0 connection to DAW—up to 480Mbps
- 44.1 to 96KHz sample rates, 24-bit resolution
- 4 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputs
- Record up to 6 sources at once
- 2 Analog 1/4" TRS (Stereo Main) outputs
- dbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (4 total)
- 2 Hi-Z instrument inputs
- Supports Windows and Mac platforms
- 48V phantom power for each input pair
- Input signal metering via 8 LED's per channel
- Signal mixing and stereo bus signal metering
- 2 1/4" high-output
- headphone connections
- MIDI In/Out
- S/PDIF I/O
- Zero-latency monitoring
- Low-latency ASIO drivers
- Lexicon Pantheon II VST/AU reverb plug-in
- Software suite includes Steinberg's Cubase LE4, and Toontrack
- EZdrummer Lite
Between Lexicon and dbx, you get recording and processing from two of the most respected
names in pro audio — how can you wrong? Order yours today!
Lexicon I-ONIX U42S USB 2.0 Audio/MIDI Interface Specifications:
- Microphone Inputs: Female XLR Pin 2 Hot
- Input Impedance: 3kω balanced
- Phantom Power: +48 Volts
- Maximum gain: +55dB
- E.I.N. (at max gain): 127dB @ 55dB gain typical (150ω source), 130dB @ 55dB gain typical A-weighted (150ω
source)
- Maximum Input Level: +8dBu
- Frequency Response: +/ 1.5dB, 20Hz-20kHz
- THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBu
- Line Inputs: 1/4" TRS balanced or unbalanced
- Input Impedance: 20kω balanced, 13kω unbalanced
- Maximum Input Level: +18dBu
- Frequency Response: +/ 1.5dB, 20Hz-20kHz
- THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBu
- Instrument Input: 1/4" TS unbalanced
- Input Impedance: 1Mω
- Maximum Input Level: +10dBu
- Frequency Response: +/ 2.5 dB, 20Hz-20kHz
- THD+N: <0.08%, 1kHz, +4dBu
- Line Outputs: 1/4" TRS balanced or unbalanced
- Level: +18dBu maximum
- Impedance: 32ω Balanced, 16ω Unbalanced
- Headphone Output: 1/4" stereo jack 250mW per channel at 50ω
- MIDI Interface: 5-pin DIN connectors for MIDI in and MIDI out
- Sample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application)
- Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHz
- D/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHz
- A/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHz
- Power requirements: Power adaptors for 100—240 VAC, 50/60Hz, 15W
|
|
|
|