The XDR1 Foot Pedal Receiver is a component of the Line 6 X2 XDS95 24-Bit Digital Instrument Wireless System.

The XDS95 24-Bit Digital Instrument Wireless System from X2 delivers your tone and performance with the sound and feel of a direct wire connection — all at a price that won't break the bank. Features include: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances without the use of companders, five simultaneously compatible channels, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel).

Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable. System includes a digital UHF bodypack transmitter, digital UHF 'stomp-box' receiver, instrument cable, users guide and all necessary batteries.

Line 6 XDR1 Foot Pedal Receiver for the XDS95 System Specifications:

• XDR1 Receiver Specifications:
• D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
• Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
• Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground
• LED Display: Power On, Data Link, Channel, Battery Life, Audio Level Meter
• Controls: Power On/Off, Channel/Mode Select
• Dimensions: 3.078" W x 1.17" D x 4.7" H
• Power Requirements: 9V DC 500mA via included AC/DC adapter
• Weight: .45 lbs approx.

Go digital and enjoy interference-free performance.