|
|
|
|
|
An efficient combination of power and value.
The PR 15D packs power and full-range sound quality into one compact loudspeaker. This 2-way powered
system contains 270W of bi-amped power. A separate amplifier for each speaker provides crystal clear sound even at very high
levels. 200W powers the heavy-duty 15" woofer and 70W are dedicated to the RX 14 compression driver. Both amplifiers feature
DDT compression, which virtually eliminates audible power amplifier clipping.
The enclosure utilizes tough polypropylene
in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an eye-pleasing yet durable powered speaker
system. The PR 15D has a built-in three-channel mixer with individual level controls for XLR or 1/4 inch connections. Molded-in
handles provide ease of transport while multiple mounting points for pole stand and Peavey Versamount brackets make it perfect
for installs.
The Peavey PR 15D has a variety of applications such as sound reinforcement, public address, side fill
system, karaoke, or musical playback. It also makes an excellent stage monitor and can be easily added to an existing sound
system.
Peavey PR 15D 15" Active Speaker Features:
- Bi-amplified powered system with 270 watts maximum output
- Both power amps have DDT compression
- 15" woofer with 2.375" VC with lightweight neodymium magnet
- RX14 1.4 inch titanium compression driver
- Peak SPL up to 120 dB with music
- Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input
- Two 1/4 inch phone jack inputs with concentric level controls
- Input mixing built-in
- Molded-in horn has exceptionally smooth response and pattern control
- Top and sides handgrips
- Pole mount molded-in
- Top and bottom flying point insert
- Light weight Neodymium woofer
Order today and class up your sound.
Peavey PR 15D 15" Active Speaker Specifications:
- Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 47 Hz to 20 kHz (±3 dB)
- Usable Low Frequency Limit (-3dB point): 47 Hz
Internal Power Amplifiers (@120 VAC line):
- Woofer — 200 Watts peak dynamic power
- 140 watts @ less than 0.1% distortion
- Tweeter — 70 Watts peak dynamic power
- 50 Watts @ less than 0.1% distortion
Nominal Sensitivity (1W @ 1M, swept sine input in anechoic environment): 97
dB
Maximum Sound Pressure Level: 120 dB music peak
Nominal Radiation Angles: 90 degrees horizontal by 40 degrees
vertical
Transducer Complement
- 12" heavy duty woofer, and Rx 14 1.4 titanium diaphragm compression driver tweeter
Box Tuning Frequency (Fbox):
55 Hz
Electroacoustic Crossover Frequency: 2000 Hz
Crossover type: Internal Electronic 2-way crossover with
CD horn EQ, level matching, bass boost and subsonic filtering.
Crossover slopes: 18 dB/octave (third order) low pass,
18 dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer,
so there is no need for phase alignment or time delay of the signals.
Electronic Input Impedance (Nominal): 10k Ohms
unbalanced, 20 K Ohms balanced line level, 2.4 k Ohms balanced mic level.
Input Connections
- One combo female XLR/1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity.
Also has two 1/4" phone jack line level unbalanced inputs with concentric pair of level controls.
Enclosure Materials
& Finish: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured
finish. Molded material is dark gray.
Mounting: Subwoofer pole-mounting via molded-in mount, flying via Versamount
70 and four rubber feet for floor use.
Optional: Impulse 200 Floor Monitor Kit (FG# 00370480)
Dimensions 28.56"
(72.5 cm) tall by 21.31" (54.1 cm) wide {11.50"/29.2 cm in rear} by 17.00" (43.2 cm) deep
Net Weight: 52 lbs. (21.8
kg)
Electronics and Amplifier Specifications
Electronic Input Impedance (Nominal): Primary balanced input: 20
k ohms line level sensitivity selected, 2.4 k ohms mic level sensitivity selected, 10 k ohms unbalanced 1/4".
Mic Switch
Sensitivity Increase: 30 dB
- Infrasonic filter protection: 36 dB/octave roll-off
- Nominal Amplifier Frequency Response: +0, -1 dB from 10 Hz to 30 kHz
- Hum and Noise: Greater than 90 dB below rater power
- DDT Dynamic Range: Greater than 14 dB
- THD and IM: Typically less than 0.1%
- Damping Factor: Greater than 100 @ 1000 Hz, 8 Ohms
- Power requirements of Peavey PR 12PD System (domestic): Nominal 100 Watts, 120 VAC, 60 Hz
|
|
|
|
|
|
|