Converts MIDI signals from any controller to operate footswitch functions of Tech 21 gear.
The Tech 21 ARMD MIDI Converter enables you to control the footswitch functions of Tech 21's Trademark
Series of multi-channel guitar amplifiers and Landmark Series of Bass amplifiers with any MIDI controller.
Trademark 60, Trademark 120, Trademark 300, Landmark 300, Landmark 600
Simply connect a standard 5-pin MIDI cable from
the MIDI out on your MIDI controller to the MIDI In of the ARMD. Then connect the 1/4" Out of the ARMD to the 1/4" footswitch
jack on the amp you want to control with a standard instrument cable.
An additional 1/4" Out is provided on the ARMD
if you should want to control two of the same amplifiers.
The Tech 21 ARMD is phantom powered through the instrument
cable from the footswitch jack on the amplifier, so batteries are not required. A MIDI foot controller transmits information
to remotely control anything that accepts MIDI program change information.
In order to communicate program change information,
the MIDI controller and the ARMD need to be set to the same channel. MIDI channels can be set on the ARMD by accessing six
internal DIP switches via the removable back door.
Change patches and presents on your Tech 21 gear without having to buy a new controller.
Put it in the cart!