The PDX-3000mix is a professional turntable that gives you absolute control over the vinyl. It has an S style tone arm that is constructed with high quality bearings which support the tone arm movement with great tracking ability and durability. The arm pipe is made from quality aluminum which provides a fine tone signal for quality sound pick-up and output. In addition of the traditional pitch control and ultra pitch a torque simulator system is built in to adjust the motors torque power to the DJs preference allowing you to scratch but also mix with the PDX-3000mix like no other turntable before! It is also among the world's first turntables to have MIDI connection which enables external MIDI devices to control the pitch. Stability is a known virtue of the PDX series and is the same for the PDX-3000mix.

It has a Torque Simulator System that enables DJs to adjust the rotation torque of the motor to their preference. This changes the characteristic of the pitch control the touch of when slowing down the platter with your finger and when twisting forward with the spindle especially when mixing. The motor characteristic of which a scratch DJ and a mix DJ ask for is absolutely different. The most distinctive difference is the required servo characteristic of the motor. DJs into scratching and turntablism need to have the motor always at a constant speed rate to keep the rhythm and pitch steady no matter how hard they spin. On the other hand DJs who are into the mix need to be able to finely adjust the pitch by touching the platter. And for all DJs the motor must have a starting torque which immediately reaches the constant speed rate. Vestax has sampled and digitally simulated these various servo characteristics and as a worlds first feature has made it adjustable with one little rotary knob. The torque simulator enables DJs to use the PDX-3000mix for any style they wish.

It also has a Break control to adjust the stopping speed of the platter. The pitch control fader is slightly heavier than the previous PDX series for fine adjustment and advanced accuracy. It has a quartz lock button that is turned off when the power is turned on. Vestax's original DC direct drive motor obeys accurately to the electric signals sent to the circuit. The platter is screwed down to the spindle to prevent it from slipping toward the rotation direction. The MIDI input connection combines analog with digital allowing external MIDI devices to control the rotation speed and sparking DJs with new ideas.

Its adjustable tone arm base is constructed with a rubber cushioning to absorb unneeded vibrations which come from the body. This rubber cushioning is also applied to protect the body from feedback. Ideally the tone arm height should be adjusted so that it is horizontal to the vinyl. Although certain DJs (especially turntablists) will set the arm base to a higher position and add more needle pressure so the needle doesn't skip in any condition. This tone arm base comes with a scale which helps the DJ to set the arm height to his or her preference at all times.

The PDX-3000mix's direct drive DC motor has powerful torque and reaches a constant speed rate within 0.5 seconds from pushing the start/stop button. An extremely precise regulator is required to accurately control such a motor and with the PDX-3000mix it is digitally (32-bit CPU) controlled with a digital servo. This servo keeps the motor rotating no matter how heavily the pitch is changed reverse button is pushed or the platter is pulled back. The platter completely obeys the motors movement by having it screwed down to the spindle of the motor.

The ultra strong foamed ABS plastic that constructs the body is advanced in durability strong against feed back and is highly resistant to impact. It also has insulated feet called the insulators that are filled with rubber for absorbing shock and have airspace inside for better feedback absorbent.

Vestax PDX-3000Mix Professional Turntable with S Tone Arm & MIDI Specifications:

• Motor
• Direct Drive DC Motor
• Starting Torque 2.7kg
• Starting Time 0.5sec
• Wah Flatter 0.07% W.R.M.S.
• Torque: Digital torque simulator
  
  Tone Arm:
• S style tone arm
  
  Size / weight:
• 454(W) X 162 (H) X 365 (D) mm / 9.5kg
  
  Power:
• AC100V

Vestax PDX-3000Mix Professional Turntable with S Tone Arm & MIDI Features:

• S style tone arm
• The Torque Simulator System
• Break control to adjust the stopping speed of the platter
• A heavier pitch control fader for fine adjustment and advanced accuracy
• Standard +/-10% pitch control and +/-50% pitch control
• Vestax's Original DC direct drive powerful motor
• MIDI input connection
• Torque Simulator
• Adjustable tone arm base
• Ultra strong foamed ABS plastic body
• Air Suspension Insulators (feet)

Why wait to get get true vinyl control? Call or click now!