The B-Band UKKO-KIT 5-Piece contact drum mic system is a remarkable way to capture the true tonality of your drums consistently, conveniently, and with extreme isolation. This system consists of two important components: UKKO DM preamps, built with high-quality class-A electronics, and UKKO DST Contact mics for superb tone. This system works with any size drums, and gives you high-resolution sound, and easy setup!

This mic system was designed to be able to blend-in visually with your drum kit. That is why B-Band designed the DM preamps to be chrome colored to match most drum hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.

Setting up and tearing down have never been this easy. The DST mics have an adhesive back that mounts easily and discreetly on the inside of the drum shell near the batter head. The DST lead wires are fed through the drum's air holes to the DM preamps. The DM preamps for the snare drum and toms come with two different mounting options: mounting at the air hole outside of the drum, or a rim clamp mounting. The air hole mounting option was specially designed to not interrupt the flow of air as the drum breathes. Being as the DM preamps are so small in size, there is no need to remove them to put the drums in their cases, leave them on and be ready for the next gig or studio session.

Inside the DM preamps there are two mini switches, which contour the sound for choice of tone. The DMS, DMT, and the DMK preamps all have 2 different frequency choices from each other because snare drums, toms, and kick drums all have different tonal characteristics.

B-Band UKKO-KIT 5-piece Contact Drum Mic Set Specifications:

• The UKKO-S
• The DMS Preamps mini switches: One switch controls a +3dB mid boost at 500 Hz and the other is for a 6dB high cut
• Frequency response: 60Hz 35kHz (-3dB)
• Phantom power required: 12 50-volt
• Output impedance: 200 ohm balanced
• Weight: 52 g. / 74 g. with rim mount
• Dimensions: 76 mm (3.00") / 48mm (1.90") / 40mm (1.60") without rim mount, 102mm (4.00") / 48mm (1.90") / 66mm (2.60")
  
  The UKKO-K
• The DMK Preamps mini switches: One switch controls a -6dB mid cut at 330 Hz and the other is for a +6dB high boost at 5 kHz
• Frequency response: 22Hz 35kHz (-3dB)
• Phantom power required: 12 50-volt
• Output impedance: 200 ohm balanced
• Weight: 52 g.
• Dimensions: 76 mm (3.00") / 48mm (1.90") / 40mm (1.60")
  
  The UKKO-T
• The DMT Preamps mini switches: One switch controls a -6dB mid cut at 1 kHz and the other is for a +6dB high boost at 5kHz
• Frequency response: 22Hz 35kHz (-3dB)
• Phantom power required: 12 50-volt
• Output impedance: 200 ohm balanced
• Weight: 52 g. / 74 g. with rim mount
• Dimensions: 76 mm (3.00") / 48mm (1.90") / 40mm (1.60") without rim mount, 102mm (4.00") / 48mm (1.90") / 66mm (2.60")

B-Band UKKO-KIT 5-piece Contact Drum Mic Set Features:

• 1 UKKO-S snare drum mic system
• 1 UKKO-K kick drum mic system
• 3 UKKO-T tom mic systems
• Extreme isolation of each drum with no bleed from other drums
• Mounts without modification to the drums
• Reduces the need for audio gate effects
• Ultra-quick setups
• Two supplied mounting options for the DMS and DMT and preamps, the DMK uses the air hole mounting system
• No need to position mics or mic stands; just plug standard XLR cables into the preamps and play
• Clean looks without the clutter of mic stands

Get those mic stands out of the way, order this drum miking system today!