|
|
|
|
Pure all-tube tone with sophisticated modern control for versatility.
One of the most versatile combo amps yet, the improved Engl Sovereign Guitar Amp is available here as
a 2 x 12 combo. 4 channels of finest Engl tube sounds, switchable via MIDI, won't leave any doubt that you can take the pure
tube tone into small clubs or on the bigger stages worldwide. No compromise in craftmanship, it is equipped with Accutronics
spring reverb and Celestion speakers for top-of-the-line quality. Modern punchy bottom end sounds in a handy format.
This
sophisticated guitar amp marries the unrivaled tone of all-tube technology to the awesome sound-shaping might of control features
powered by state-of-the-art microchip circuitry. This elegant combination puts at your fingertips a vast range of great fundamental
tones and an all but inexhaustible reservoir of compelling variations, all of which may be controlled remotely via MIDI.
Engl Sovereign 100W 2x12 Guitar Combo Amp Features:
- Four Channels: Clean, Crunch, Lead I and Lead II
- 2 Gain options
- 2 dedicated and specially tuned voicing sections
- Large spring reverb
- 2 effect loops
- 2 each poweramp Master knobs
- Balanced, frequency-compensated XLR line output
- MIDI In and Thru ports
- 128 MIDI presets
- Three different remote interface ports
- Noise Gates
- Two fans for cooling
More channels, 2 of everything else, and MIDI control with 128 presets. And it's a tube
amp! Order today
Engl Sovereign 100W 2x12 Guitar Combo Amp Specifications:
- Output power: approx. 100 watts, adjusted accordingly to 4, 8 and 16 ohms
Input sensitivity levels
- Input: from -20 dB, nominal, max. 0 dB
- Effect Return: from -20 dB nominal, max. 0 dB
Output levels
- SEND, level range: from -20 dB to approx. 0 dB max.
- Frequ.Comp. Line Out: max. +12 dB (balanced), +6 dB (unbalanced)
Power consumption: approx. 330 watts max.
Fuses
- External at 230/240 mains voltage: 2 ATL, internal: 2,5 ATL (T: slo-blo)
- External at 100/115/120 mains voltage: 4 ATL, internal: 5 ATL (T: slo-blo)
Tubes
- V1, V2, V3, V4: 6L6GC or 5881, matched sets
- V5: ECC83 FQ, input tube
- V6, V7: ECC83 selected
- V8: ECC83 standard
Logic control system
- Processor, software: AT89C52 microcontroller with internal 8K Flash Memory for software source code, upgradeable with
external Programmer
- Memory: EEPROM 93C66 for data retention
System interfaces
- MIDI: Asynchronous data protocol according to the MIDI standard; MIDI program changes 0-127; MIDI channels 1-16; MIDI
controller 7 (main volume, value 0-5 = Master Volume Mute, Mute, value > 5 = default Master Volume level
- Serial Amp Control: Proprietary ENGl asynchronous data protocol
Cooling: two fans each 12 volts DC - 1,2 watts
Dimensions:
58 x 48 x 27 cm
- Weight: approx. 29 kg
|
|
|
|