Especially developed for interviewing and broadcasting.
The MCE 58 condenser microphone
has a very high unbalanced output that allows direct connection to mobile DAT and MD-recorders. The elasticated suspension
of the transducer element eliminates unwanted handling noise and built-in active filters suppress unwanted low-frequency noise
such as traffic rumble. The MCE 58 has a frequency response curve which has been optimized for excellent speech intelligibility
The non-glare surface is scratch-resistant and will withstand the rough use often associated with news gathering events.
Requires
phantom power.
Beyerdynamic MCE 58 Electret Omnidirectional Condenser
Microphone for ENG/EFP Specifications:
- Transducer type: Condenser
(back electret)
- Operating principle: Pressure
- Polar pattern: Omnidirectional
- Open
circuit voltage at 1 kHz (0dB = 1V/Pa) : 4 mV/Pa
- Nominal impedance: 370 Ohms (unbalanced)
- Load
impedance: 2 k Ohms
- Connector: 3-pin XLR; 13 = ground 2 = signal +
- Length: 260 mm
- Shaft diameter: 25 mm
- Head diameter: 45 mm
- Weight without cable: 200 g
- Frequency response: 40 - 20000 Hz
- Max. SPL at 1 kHz: 132 dB
- S/N ratio
rel. to 1 Pa: 60 dB
- A-weighted equivalent SPL: 26 dB
- Power supply: 1.5 V battery (type
Mignon AA/LR 6)
- Current consumption: 20 mA
Beyerdynamic
MCE 58 Electret Omnidirectional Condenser Microphone for ENG/EFP Features:
- Omnidirectional
polar pattern
- High output level
- Rugged construction
- Slim line design
- Battery powering (1.5 V)
Order today and equip
yourself quality mobile recording.
Customers who shopped for the Beyerdynamic MCE 58 Electret Omnidirectional Condenser Microphone
for ENG/EFP ultimately bought: