The CAD CM100 Hanging Mini Gooseneck Condenser Microphone has a wide, flat frequency response providing unsurpassed, transparent and professional sound quality. The cardioid pickup pattern minimizes annoying feedback when the CAD CM100 is used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off-axis sounds. Requires phantom power.

CAD CM100 Hanging Mini Gooseneck Condenser Microphone Specifications:

• Generating Element: Electret Condenser (Phantom Powered)
• Polar Pattern: Unidirectional (Cardioid)
• Frequency Response: 40 Hz - 20 kHz
  
  Output Level:
• Power Level: -48 dB (0 dB - 1 mW per 10 microbars)
• Open Circuit Voltage: -68dB (0 dB = 1 volt per microbar) 4 mV/Pascal
• Impedance: Low (150 ohms nominal)
• Dynamic Range: 100dB
• Equivalent Noise Level: Less than 30dB, A weighted
• Maximum SPL: 130dB (1% THD, open circuit)
• Powering:
• Supply Voltage: 9 - 52 VDC, positive pins 2 & 3 reverse polarity protected
• Current Required: Less than 2.0 mA over operating voltage range
• Phasing: Positive Pressure on Diaphragm generates a positive voltage on pin 2 relative to pin 3
  
  

CAD CM100 Hanging Mini Gooseneck Condenser Microphone Features:

• Wide, flat frequency response
• Cardioid pickup pattern minimizes annoying feedback

CAD CM100 Hanging Mini Gooseneck Condenser Microphone Includes:

• 30' cable

Put this in your locker for an extraordinarily easy price. Order today!