Galaxy Audio's battery-powered Cricket Polarity Test Set makes it easy to determine whether every component in an audio system from patch bay to console to speakers is in or out of polarity. The Cricket tests balanced and unbalanced cables of up to 2000 feet in length. It will drive a "snake" (even one with transformers) and indicate which of a microphone's XLR connector pins is hot. The Cricket can also plug directly into a speaker cabinet and drive the components. A glance at the Galaxy Cricket's red and green LED's can save hours of troubleshooting. No wonder it's an indispensable tool for sound system owners operators installers and sound rental companies.

Cricket Send Pulse Generator
•Pulse Waveform Polarity: Positive-going balanced line output pulse switch selectable for hi or low level balanced signal with positive pressure produced at the tip of 1/4-inch jack and pin #2 of XLR jack. •Speaker output pulse: Accepts 2 ohm (or greater) load with positive pressure produced at the tip of a 1/4-inch speaker jack and positive terminal of an internal speaker.

Cricket Receive Pulse Detector
•Internal microphone for testing speaker output. •Polarity/Continuity Test: Female XLR pin 231 continuity; 1/4-inch jacks; tip ring continuity.
•LEDs: Green indicates positive-going pulse polarity with power switch in "ON" position and battery status with power switch in "BAT" position. Red indicates negative-going pulse polarity.
•Detection inputs: one 1/4-inch balanced; one XLR balanced.
•Mic sensitivity; -64 dB +/- 3dB

Galaxy Cricket Polarity Test Set Specifications:

• Cricket Send Pulse Generator
• Pulse Waveform Polarity: positive-going balanced line
• output pulse switch selectable for hi or low level balanced
• signal with positive pressure produced at the tip of 1/4-inch
• jack and pin #2 of XLR jack.
• Speaker Output Pulse: Accepts 2 ohm (or greater) load with
• positive pressure produced at the tip of a 1/4-inch speaker
• jack and positive terminal of an internal speaker.
• Dimensions: 3.33"W x 1.75"H x 5.25"L
• Weight (with battery): 1.10 lbs. (.5 kg.)
• Battery: 9 volt alkaline only (battery included)
  
  Cricket Recieve Pulse Detector
• LED Indicators:
• Green: indicates positive-going pulse polarity with power
• switch in "ON" position and battery status with power switch
• in "BAT" position.
• Red: indicates negative-going pulse polarity.
• Detection inputs: one 1/4-inch balanced; one XLR balanced.
• Mic Sensitivity: -64 dB +3 dB
• Weight (with battery): 1.02 lbs. (.46 kg.)
• Battery: 9 volt alkaline only (battery included)
• Switches: Internal microphone for testing speaker output.
• Polarity/Continuity Test: Female XLR pin 231 continuity;
• 1/4-inch jacks: tip ring sleeve continuity.
• Test set shipping weight: 3 lbs. (1.36 kg.)
  
  

Galaxy Cricket Polarity Test Set Features:

• Checks continuity and polarity
• 1/4" TRS and XLR in/out
• Tests speakers mics cables and wireless systems
• Tests mixers and signal processors for polarity inversions
• Internal speaker for testing mic polarity
• Internal mic for testing speakers
• High-level output for testing miles of cable
• Battery test on
• receive module saves troubleshooting time
• Convenient operation charts located on the under side of each unit

A must-have and powerful tool with a reasonable price. Order today.