Includes the DBX DriveRack PA Processor and the DBX RTA-M Reference Microphone. Drive your PA to a whole new level of performance with the DriveRack PA Complete Equalization and Loudspeaker Control System. The DriveRack PA from dbx Professional Products represents a complete integration of the key elements that help ensure optimal loudspeaker system management in PA-specific applications. the DriveRack PA is able to provide its user with top-tier, pro-level loudspeaker management specifications, yet still remain appealing to the budget-conscious audiophile who requires a tried and true utilitarian workhorse. With its all-inclusive, no-compromise design, the DriveRack PA has been systematically developed and designed to grow with your system needs for years to come.

DBX DriveRack PA Processor
The dbx DriveRack PA Processor will give you gig after gig of crisp, clean sound. Delivers auto EQ; RTA; dual 28-band graphic EQ; feedback elimination; sub-harmonic synth; 2x3, 4, 5, or 6 crossover; limiter on the output stage; and presets matching the latest JBL speakers and Crown power amps. Wizard setup help.

The DriveRack PA provides state-of-the-art signal processing, while using a simple and intuitive user interface. This goal has been achieved by offering 2 independent channels of processing power with a linkable 28-band graphic equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A subharmonic synthesizer on the input, with a 6-channel output system that includes parametric EQs, and Peak Plus limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system represent a methodical design that is guaranteed to deliver optimal all-inclusive processing in a completely scalable system.

RTA-M Reference Microphone
The DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack PA 24-Bit EQ Loudspeaker Control System for feedback elimination in venues and studios.

dbx DriveRack PA Processor with RTA-M Reference Mic Specifications:

• System Performance
• Dynamic Range: 110dB A-weighted, >107 dB unweighted
• THD + N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
• Frequency Response: 20Hz - 20kHz, +/- 0.5dB
• Interchannel Crosstalk: >110dB min, 120dB typical
• Crosstalk input to output: >+100dB
• Delay: 10ms per channel (60 ms total)
  
  A/D Performance
• Type: dbx Type IV conversion system
• Dynamic Range: line 110dB A-weighted; 107 dB unweighted
• Type IV dynamic range 123 dB with transient material, unweighted, 22kHz BW
• 121 dB with transient material, unweighted, 22kHz BW
• 115 dB typical with program material, A-weighted, 22kHz BW
• Sample Rate: 48kHz
  
  D/A Performance
• Dynamic Range: 112 dB A-weighted, 110dB unweighted
  
  Analog Inputs
• Number of Inputs: (2) Line inputs. (1) RTA Mic input
• Connectors: (2) Female XLR line inputs. XLR RTA Mic input
• Type: Electronically balanced/RF filtered
• Impedance: >40k ohm
• Max Input line level: +20dBu
• CMRR: >45dB
• RTA Mic Phantom Voltage: +15VDC
• RTA Mic EIN: <-110dBu, 22Hz-22kHz, 150 ohm
  
  Analog Outputs
• Number of Outputs: 6
• Connectors: Male XLR
• Type: Electronically balanced, RF filtered
• Impedance: 120ohms
• Max Output Level: +20dBu

dbx DriveRack PA Processor with RTA-M Reference Mic Features:

• Stereo Feedback Elimination with 12 feedback notch filters
• Dual 28-band Graphic EQ
• Classic dbx Compressor
• 120A Sub-harmonic Synthesizer
• 2x3, 2x4, 2x5, 2x6 Crossover Configurations
• Stereo Multiband Parametric EQ
• Stereo Output Limiters
• Alignment Delay
• Pink Noise Generator
• Auto-EQ with 28-band RTA
• JBL Speaker and Crown Power Amp Tunings with Setup Wizard
• 25 User Programs/25 Factory Programs
• 2 Channel XLR Input and 6 Channel XLR Output
• 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
• Full Graphic LCD Display

Order today and get clean, crisp sound effortlessly.