The Ashly MQX-2150 is a 15-band graphic equalizer that features 2 channels of fifteen-band 2/3 octave equalization and a switchable high-pass filter in 1RU. MQX Series EQ's use precision filter design and summing circuitry with each filter exhibiting true constant "Q" response. The center-detented position of each fader acts as an on/off switch for its filter (to minimize any possible degradation to signal noise levels) ensuring absolutely flat response and high signal-to-noise ratios.

Instead of 20mm plastic faders typically used by other manufacturers Ashly uses a custom-manufactured 25mm slide faders. The additional range and accuracy allows ±15 dB of boost or cut adjustment on each individual filter (an Ashly exclusive in this class of product).

Input and output connections include 1/4" TRS phone jacks as well as standard locking XLR's. Ashly's servo-balanced output circuitry maintains unity gain even if pins 2 or 3 are connected directly to ground. The power supply is a universal switching power supply which operates from 90 - 240VAC 50/60Hz with the power switch located on the rear panel. MQX Series equalizers are covered by an exclusive Five Year Worry Free Warranty.

APPLICATIONS: Monitor Systems; Front of House Sound Systems; Installations Requiring Fixed EQ; Recording/Broadcast Studios; DJ Systems

Ashly Audio MQX-2150 Dual 15-Band Graphic Equalizer Specifications:

• Input Type: Active Balanced
• Input Impedance: 20K ohm Balanced 10k ohm Unbalanced
• Max. Input Level: +23dBu
• Output Type: Pseudo-Balanced (single ended signal with balanced impedance)
• Output Impedance: 200 ohm Balanced 100 ohm Unbalanced
• Max. Output Level: +23dBu
• Connectors: 1/4" Phone jack and XLR
• Frequency Response: ñ .25dB
• Total Harmonic Distortion: < .01% @ +20dBu
• IM (Intermodulation) Distortion (SMPTE): < .01% @ +20dBu
• Output Hum And Noise: < -96dBu (20Hz-20kHz unweighted)
• Crosstalk: < -90dB 20Hz-20kHz
• Filter Type: Constant Q/Wein Bridge
• Bandwidth: 1/3 octave
• Tolerance: ±3%
• Range: ±6 or ±15 dB
• Subsonic Filter: 18dB/octave @ 20Hz (internally switchable)
• Power Requirements: Nominal Voltage: 90-125VAC 50-60Hz (240VAC available); Minimum Voltage: 90VAC
• Power: 10W
• Shipping Weight: 8 lbs
• Dimensions: 19"L x 1.75"H x 6"D

Ashly Audio MQX-2150 Dual 15-Band Graphic Equalizer Features:

• Constant "Q" design for low ripple and minimum interaction
• Precision Wein Bridge Filters
• Balanced XLRs and 1/4" TRS Jacks on Inputs and Outputs
• Selectable 15dB or 6dB Range
• 18dB/Octave High Pass Filter
• Low Noise Design
• Silent In/Out Switching
• Signal Present and Clip LEDs
• 25mm Fader with Center-Off Position
• 5-Year Worry-Free Warranty

A well designed unit that does more better. Order today.