2 channels of fully programmable parametric EQ.
The Protea 2.24PS 2-Channel Parametric
EQ allows for the installation of multiple channel parametric equalizers where tamperproof precise audio equalization is required.
Ashly's exclusive Protea System Software running on a PC or a MIDI controller can easily control and program the processor.
The Protea 2.24PS is housed in an all-steel 1RU chassis and has two independent channels of fully programmable 12-band parametric
EQ with with limiter high- and low-pass filter and time delay functions.
Each parametric band allows for 1/25th to
3.3 octave Q a 24-step/octave frequency adjustment from 20Hz to 20KHz and level control of +10/-20dB in 0.5dB increments.
High and low shelf filters are adjustable from 1.6kHz to 20kHz and 20Hz to 240Hz respectively. High and low pass filters are
24dB/octave adjustable from20Hz to 10.6kHz and 33Hz to 20kHz respectively. Time delay is adjustable up to 1.364 seconds.
Other
features include 24-bit A/D-D/A conversion 24-bit/100MHz digital processing RS-232 and MIDI interface linkable channels +6dB/-infinity
master gain and 128 preset locations. Both units display individual channel numbers using 7-segment displays. Signal present
and signal clip levels are indicated by discrete LEDs.
Ashly Audio
Protea 2.24PS 2-Channel Parametric EQ Sys Processor Specifications:
- Input:
- Type: Active Balanced
- Impedance: 18 K ohms
- Max. Level: +20dBu
Output:
- Type: Pseudo-Balanced
- Impedance: 200 ohms
- Max. Level: +20dBu
Frequency
Response:
- >.25dB 20Hz-20kHzTHD (20Hz-20kHz: <.01% @ 1KHz +20dBu
- Dynamic Range: >110dB
(20Hz-20KHz) unweighted
- Output Noise: <-90dBu unweighted
Filters:
- Type: Parametric
- Number: 2 X 12
- Bandwidth: 1/25 Octave to 3.3 Octave
- Frequency Resolution:
1/24 Octave
- Range: +10/-20dB 0.5dB Increments
Power Requirements: 90-125VAC 50-60Hz 27W
- 180-250VAC
50-60Hz 27W
Shipping Weight: 14 lbs
- Dimensions: 19"L x 1.75"H x 8"D
- I/O Connectors:
XLR 1/4"
- Environmental: 40-120 deg. F Noncondensing
Compressor/Limiter:
- Threshold:
-20dBu to +20 dBu 1dB increments
- Ratio: 1.2:1 to Infinity
- (1.2:1 1.5:1 2:1 3:1 4:1 6:1
10:1 20:1 inf:1)
- Attack: 0.5ms to 50ms per dB
- (.5 1 2 5 10 20 50ms)
- Release:
10ms to 1 sec per dB
- (10 20 50 100 200 500ms 1 Sec)
HPF: 24dB/Octave
- Range: 20Hz
to 10.6Khz
- LPF: 24dB/Octave
- Range: 33Hz to 20.1KHz
Delay:
- Maximum
Delay: 1.364 seconds
- Increment: 20us
Processor:
- Input A to D: 24 Bit
- Output
D to A: 24 Bit
- Processor: 24 Bit 56 Bit Accumulator
- Sample Rate: 48KHz
- Propagation
Delay: 1.46ms
Ashly Audio Protea 2.24PS 2-Channel Parametric
EQ Sys Processor Features:
- 24 Bit A/D - D/A Audio Resolution
- 24
Bit/100MHz (x2) Digital Signal Processing
- 2 - 12-band channels of parametric
- Programmable
Compressor/Limiter
- Programmable Delay up to 1.364 Seconds
- Programmable High and Low
Pass Filters
- Programmable High and Low Shelf Filters
- Control from or MIDI
- Contact
Closure for External Recall of 6 Scenes
- Balanced XLR and 1/4" Inputs and Outputs
- Linkable
Channels
- Constant Q/Reciprocal Filter Design
- +10/-20dB Boost and Cut 0.5dB increments
- 128 Preset Locations 50 Scenes
- RS-232 Computer Interface
- Full MIDI Implementation
- 5-Year Worry-Free Warranty
Order today and put
Ashley in control.
Customers who shopped for the Ashly Audio Protea 2.24PS 2-Channel Parametric EQ Sys Processor
ultimately bought: