The ATH-PRO5 MS camouflage dynamic headphones have 40mm drivers with a neodymium magnet system and CCAW voice coils that deliver outstanding sound quality. A coiled cable at the left earpiece terminates to a mini plug with included ¬" adapter.

Audio-Technica ATH-PRO5MS Monitor Headphone Specifications:

• Type Closed-back Dynamic
• Driver Diameter 40 mm
• Magnet Neodymium
• Voice Coil Copper-clad aluminum wire
• Frequency Response 15 28000 Hz
• Maximum Input Power 1300 mW
• Sensitivity 103 dB/mW at 1 kHz
• Impedance 40 ohms
• Weight 200 g
• Cable 1.5 m (Single) OFC
• Connector 1/8" (3.5 mm) mini stereo gold-plated
• Accessory Included Detachable 1/4" (6.3 mm) adapted
  
  Open Circuit Sensitivity At 1 kHz with 1 Pa (Pascal) = 94dB sound pressure level (SPL) measured at diaphragm. Stated in dB re 1 volt and in millivolts.
• Noise typical A-weighted using Audio Precision System One measurement system.
• Weight Stated for the microphone only without accessories and without attached cable/power module if applicable.
• Frequency Response (Graph) Shows mic output versus frequency with a constant sound input level from a source 0.5 meters from the diaphragm. Each vertical division in the graph is 10dB. A dashed line if present shows the effect of a low-roll-off (hi-pass) function.
• Polar Pattern (Graph) Shows mic output versus angular direction of the sound source with a constant sound input level at 1 kHz at a constant distance from the diaphragm. Zero degrees (0ø) is the "front" of the mic. Each circular division in the graph is 5 dB beginning from the 0ø point and counting inward.
• Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest.
• Headphone Sensitivity Input of 1 milliwatt at 1 kHz into rated impedance; output in dB SPL using a Brel & Kjaer 4153 coupler.
• Maximum Input Power At 1 kHz into rated impedance.
• Boom Mic Sensitivity Open circuit at 1 kHz with 1 Pa (Pascal) = 94dB sound pressure level (SPL) measured at diaphragm. Stated in dB re 1 volt and in millivolts.

Audio-Technica ATH-PRO5MS Monitor Headphone Features:

• Rotating earpieces with camouflage housing for easy one-ear monitoring
• Closed-back dynamic stereo headphones deliver exceptional clarity
• 40 mm drivers with neodymium magnets and copper-clad aluminum wire voice coils
• Rich bass response with extended high end
• Circumaural design ensures superior isolation
• Adjustable cushioned headband and lightweight design for maximum comfort
• Gold-plated 1/8" (3.5 mm) stereo connector with 1/4" (6.3 mm) adapter
• Ultra-flexible coiled cable with left-side entry

Order yours today!