|
|
 |
|
 |
|
Compact unit is easy to mount on your camera.
The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed
two completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810
receiver features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal
Display) that shows battery status and frequency settings.
Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver Features:
- Compact receiver is easy to mount on a camera
- UHF reception with 996 frequencies selectable in 25 kHz steps
- Automatic frequency scanning for easy selection of open channels
- Tone Lock squelch system eliminates interference when transmitter is off
- Balanced audio output
- Headphone monitor output with independent level control
- Soft-touch controls for easy frequency selection
- True Diversity operation for resistance to multi-path interference and dropouts
- LCD frequency and battery status display with backlight
- Antenna and AF Peak LED indicators
- Easy, user-friendly operation
- Clear, natural sound quality
- Powered by AA batteries
Order today with the protection of our 45-day lowest price and total satisfaction guarantees!
Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver Specifications:
- Receiving System: Dual independent RF sections, automatic-switching diversity
- Image Rejection: >50 dB typical
- Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
- Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
- Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
- Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
- Output Connector: 3-pin mini XLR (TA3M-type)
- Monitor Headphone Output (typical): 35 mW max., 32 ohm load
- Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
- External Power Requirements: 12V DC nominal, 500 mA
- Batteries (not included): Four 1.5V AA alkaline
- Current Consumption (battery): 315 mA typical
- Battery Life: 10 hours typical, depending on battery type and use pattern
- Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D
- Net Weight: (without batteries) 10.5 oz. (300 grams)
- Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM
- output cable; belt pouch
|
|
|
|
|
|
|
|
