|
|
|
|
|
A high-end, multi effecter and loop controller for a DJ setup
The Vestax PMC-580Pro is a 4-channel DJ mixer that controls up to 6 different effects and parameters
at once. The PMC-580Pro is also a multi-effect unit and loop control device individually equipped on each program channel
with an effects unit for the Master and Mic channel sections. This Vestax mixer also comes with USB connection, SPDIF digital
IO, a new AD/DA analog circuit and 2-band EQ for monitor/booth output. Its goal is to meet the demands of DJs in the scene.
The
Vestax PMC-580Pro mixer's effects can be operated with 2 different effect switch modes: Momentary, and Alternate. The Momentary
Mode is useful for when you want instant effects on short phrases, and the effect will be applied to the sound only while
the effect button is pushed. The Alternate Mode is useful for when you want to apply effects to a long mix: the effect will
be applied to the sound from the time the effect button is pushed until it is pushed again. Some effects apply to the sound
differently depending on the selected effect switch mode.
The Vestax PMC-580Pro mixer is loaded with 5 high spec DSP
chips. 3 to process effects and 2 for mixing sound signals. The Enhanced Dual Bit method is a high performance chip technology
of ASAHIKASE, which is applied to the AD/DA section of the PMC-580Pro, where sound signals are converted between digital and
analog. It is generated by a high capacity institutional power adaptor, which gains the heavy low groove required for excellent
Club sound. The internal power supply produces the sound signal circuit that runs on +/-18V. With the two combined, +/-24dB
of headroom is produced, creating dynamic sound. The HI GAIN TRIM control circuit is a feature that's designed to bridge the
gap between digital media, MP3s and CD source sound levels.
The Vestax PMC-580Pro DJ Mixer has an EQ/ISOLATOR select
switch on each program channel so DJs can select their prefered sound adjustment to reflect the music they play. The BEAT
KEY function operates simultaneously with the auto BOOM counter and TAP BPM counter that controls the effects BPM (Beats Per
Minute) along with the detected BPM of the playing track that helps everything stay together on time.
The two 44.1k,
48kHz sampling rate digital inputs enable digital connection and provide a sound system with no sound deterioration. Digital
music files can be played from computers and tracks can be recorded to computers via USB input/output.
The PMC-580Pro
mixer's smooth 60mm input faders provide for high precision mixing with a great feel, and large effect knobs for dynamic effect
control. The mixer's input faders and the cross fader can be easily replaced by detaching the top panel.
The Vestax
PMC-580Pro also has 3 convenient mic effects; Pitch Shift, Distortion, and Mic Echo. The Pitch Shift modulates the mic sound
within +/-1 octave and changes the voice to a high or low pitch. The Distortion deteriorates the mic sound and creates a distortion
effect, giving it a little more edge. The Mic Echo applies an echo effect to the microphone sound.
Vestax PMC-580Pro 4-Channel DigitalÿDJÿmixer Features:
- EQ / ISOLATOR select switch
- An EQ / ISOLATOR select switch is located on each program channel to enable DJs to select their preference sound adjustment
method in regards of the music they play.
BEAT KEY
- BEAT KEY operates simultaneously with the auto BOOM counter and TAP BPM counter
- BEAT KEY will control the effects BPM (Beats Per Minute) along with the detected BPM of the playing track, selected from:
8, 4, 2, 1, 3/4, 2/3, 1/2, 1/4 and 1/8
- BPM controllable effects: LOOP / DELAY / LOW cut DELAY / FLANGER
- AUTO HP, BP, LP / FLANGER / PHASER / DELAY/ AUTO PAN / TREMOLO / PANNING DELAY
INPUT/OUTPUT
- The two 44.1k, 48kHz sampling rate digital inputs enable digital connection and provide a sound system with no sound deterioration
- Digital music files can be played from computers and tracks can be recorded to computers via USB input/output
OPERATION
- Smooth 60mm input faders for high precision mixing
- The Vestax CF-PCV is applied as the cross fader together with fader curve control, suitable for mixing and scratching
- Large effect knobs for dynamic effect control
- Input faders and the cross fader can be easily replaced by detaching the section top panel.
OPTION
- The DX panel, an option item to increase inputs and outputs can be installed to the front panel for DJs who to wish to
use DJ software with the PMC-580Pro.
CLUB DJ FEATURES
- 2 Band EQ, STEREO / MONO select switch and CUE / MASTER select on BOOTH OUT and headphones to support the DJ when they're
in the mix
- The MIC section comes with a 2 Band EQ and TALKOVER switch for advanced mic performance
- XLR connection applied to MASTER / BOOTH OUT
MIC EFFECTER
- PITCH SHIFT: Modulates the mic sound within +/-1 octave and changes the voice to a high/low pitch
- DISTORTION: Deteriorates the mic sound and creates a distortion effect
- MIC ECHO: Applies an echo effect to the mic sound.
Effect your mixes in a great way, by ordering this now!
Vestax PMC-580Pro 4-Channel DigitalÿDJÿmixer Specifications:
- EFFECTS
PGM
- LOOP
- DELAY
- LOW CUT DELAY
- REVERB
- FLANGER
- FILTER SWEEP, LP FILTER
MASTER
- AUTO LPF
- AUTO BPF
- AUTO HPF
- FLANGER
- PHASER
- DELAY
- REVERB
- AUTO PAN
- PITCH SHIFT
- TREMOLO
- PANNING DELAY
MIC
- PITCH SHIFT
- DISTORTION
- MIC ECHO
INPUT / OUTPUT
- PHONO input: RCA PIN JACK
- LINE/CD input: RCA PIN JACK
- MIC input: COMBO JACK (XLR/PHONE)
- DIGITAL input: RCA PIN JACK
- RETURN input: RCA PIN JACK
- MASTER output (unbal.) PHONE JACK (bal.) XLR JACK
- BOOTH output (unbal.) PHONE JACK (bal.) XLR JACK
- REC1/2 (SEND) output: RCA PIN JACK
- DIGITAL output: RCA PIN JACK
- PHONES output: PHONE JACK
- USB input/output: B-type USB JACK
GENERAL
- Power AC-ADAPTOR / AC-20
- Power Consumption - 40 W
- Weight: 8.5 kg
- Sampling Rate: 48kHz
- Mixer part: full digital, 32 bit DSP
- Effect part: full digital, 24 bit DSP
- CPU: 32-bit * 2, 16-bit * 3
- ADC: 24-bit E-Dual-bit
- DELTA-SIGMA: 106dB
- DAC: 24-bit A-Multi bit
- DELTA-SIGMA: 100dB
- S/N Ratio: over 75 dBv (JIS-A)
- Distortion: less than 0.05%
- Freq response: 20Hz - 20kHz 3dB
LEVEL
INPUT Level / INPUT Impedance
- LINE; -10dBv / 18k ohm
- MIC; -50dBv / 5.4k ohm
- PHONO; -45dBv / 45k ohm
- RETURN; 0dBv / 32k ohm
OUTPUT Level / Impedance
- MASTER: 0dBv / over 10k ohm (bal.) over 600 ohm
- BOOTH: 0dBv / over 10k ohm (bal.) over 600 ohm
- REC: -10dBv / over 10k ohm
- SEND: 0dBv / over 10k ohm
- PHONES: 190 mW/over 8 ohm/68ohm
CHARACTERISTIC
Equalizer
- Hi: 10kHz 12dB
- MID: 100 - 10kHz 12dB
- LOW: 100Hz 12dB
Isolator
- HI: 10kHz 12dB
- MID: 100 - 10kHz 12dB
- LOW: 100Hz 12dB
-
- MIC Equalizer
- HI: 3kHz 12dB
- LOW; 100Hz 12dB
BOOTH/PHONES Equalizer
- HI: 10kHz 12dB
- LOW: 100Hz 12dB
OPTION
- DX LINE input: RCA PIN JACK
- DX LINE output: RCA PIN JACK
|
|
|
|
|
|
|