|
|
|
|
|
Lets you capture your live performance without having to take your whole DAW to the gig.
The JoeCo BBR1 Blackbox Recorder is a novel concept in live recording technology—a multi-track
recorder for the 21st century. With the Blackbox Recorder, it's no longer necessary to dismantle your home studio or recording
studio to take a complete digital audio workstation into a live venue to capture your live performance.
Plug the JoeCo
Blackbox Recorder into any standard live mixing console via the normal insert points. Use the JoeCo BBR1 recorder not only
to capture performances but also to record the sound check to help set the foldback mixes and to allow performers to hear
the live mix for themselves. In difficult acoustic spaces it also lets the sound engineer achieve the best balance without
exhausting the band with endless rehearsals before the gig.
The Blackbox Recorder provides 24 tracks of audio recording
directly onto a removable USB2 disk drive that can be immediately plugged into your Digital Audio Workstation after the gig.
Recording the audio at up to 96kHz and at 24 bit resolution into standard Broadcast Wave (BWAV) files on a standard
FAT32 formatted drive allows the user to replay the material on any workstation. Just unplug the disk from the back of the
Blackbox Recorder and plug it into your workstation as an external disk. No copying or reassembling your studio is required
and you have every mixer input recorded and available to create the perfect live remix.
For really large multi-track
recordings, multiple Blackbox Recorder units can be chained together and operated from a single control surface.
The
unit has been designed to be as simple as possible to operate, recognising that during a live performance the sound engineer
will naturally need to concentrate on the sound for the audience and the performers.
Consequently, having connected
up the unit to the desk the BBR1 defaults to all tracks being armed ready for record; just pressing Record will start the
recording. If the record button is pressed again whilst in record, the Blackbox Recorder will automatically start a new recording
so that each song can be easily identified later. To end a recording requires the STOP button to be held for 2 seconds to
ensure that the recording cannot be stopped accidentally.
A foot switch input is also provided and can be set up to
duplicate the record button function so that the engineer doesn't even have to move away from the console.
JoeCo BBR1 Blackbox Recorder Features:
- 24 track audio recorder
- Virtual Sound Check Facility
- 24bit/96kHz conversion
- Simple User interface
- Zero Latency: Inputs routed directly to output during record via relay for safety against power failure
- Keyboard input for naming tracks and songs
- Data entry wheel for navigating menus and making adjustments
- MIDI Machine COntrol (MMC)
- AES / SPDIF word clock
- Linear time code (LTC) & MIDI time code
- SONY PII (9-pin) control
- Records to standard USB2 drive in BWF format - Instant import into DAW
- Multiple BLACKBOX RECORDER units can be chained for really large multi-track recordings
- Applications as standalone multichannel recorder for use in studios, conferences, conventions, logging and monitoring
Order this amazing recording solution today!
JoeCo BBR1 Blackbox Recorder Specifications:
- Sample rates supported:
- 44.1kHz, 48kHz, 88.2kHz & 96kHz
Latency (line in to line out):
- Zero. (Line in monitor by relay bypass for power failsafe, E-E selectable when powered if preferred).
Analog
Inputs :
- levels: -10dB / +4dB switchable
- Max input level: +22dBU = 0dBFS
- A-D conversion: 24-bit, 96kHz
- 106dB S/N; 96dB THD+N (typical A-weighted 48kHz)
Analog Outputs:
- Levels: -10dB / +4dB switchable
- Max output level: +22dBU = 0dBFS
- D-A conversion: 24 bit / 96kHz
- 106dB S/N; 94dB THD+N (typical A-weighted 48kHz
Timecode Reader
- Frame Rates: 24,25,29.97 drop and non-drop, 30 fps; Trigger only (no chase)
Physical:
- 19" rack mountable – 1U high
- Dimensions (w x d x h): 16.73" x 5.90" x 1.74" (425 x 150 x 44.4 mm)
- Weight: 2.1kg
- DC input: 7.5V - 15V
- Power consumption: <18W
-
- Rear Panel Connectors:
- Analogue i/o
- 3 x 25 way Female D-type supplied with 3m looms to 1/4" stereo TRS jacks (for mixer insert points - tip send, ring return)
(Loop
through outputs:
- 8 x 1/4" stereo TRS jack sockets (Ch 17-24 only: tip send, ring return)
Monitoring:
- 1 x 1/4" stereo TRS jack socket: Headphone output
Control and Synchronisation:
- 1 x 1/4" TRS jack socket: Linear Time Code (LTC) Reader / Footswitch
- 1 x 5-pin DIN: MIDI Time code (MTC) and MIDI Machine Control (MMC)
- 1 x 9-pin Male D-type: SONY PII protocol
- 2 x RCA sockets: AES/SPDIF word clock reference input / communications to auxiliary units
Other Connectors:
- 1 x USB2 (480Mb/s) interface to disk drive
- 1 x mini DIN: PS2 keyboard socket
- 1 x 2.5mm dc inlet (9Vdc power) - power adapter supplied
|
|
|
|
|
|
|