|
|
|
|
The Astatic 651 is a small-format squeeze-to-talk, dynamic microphone for critical communications applications.
The omnidirectional 651 mic has a tailored frequency response providing clear transmission and maximum intelligibility of
speech. The microphone's housing is built to withstand rough mechanical impact while the transducer resists atmospheric extremes.
The 651 microphone has a simple-to-operate DPDT long-life, trouble-free, leaf switch. It has a low-impedance output and is
factory wired normally open. The 651 mic may be rewired in the field if a line shorting function is desired.
The Astatic
651 mic is an excellent choice for any application requiring a small-format palm-held microphone for discrete or tight mounting
spaces such as life-safety systems or paging stations where small size is required. The 651 microphone is also suited to most
public address and general, multiple-use, commercial paging applications such as factories, airports, lobbies, restaurants,
warehouses, etc.
Astatic by CAD Small Format Omnidirectional Dynamic Handheld Microphone with Switch Features:
- For commercial public-address and paging applications as well as security, emergency and life safety
- Small size for inclusion into life-safety systems or other paging stations where small size is indicated
- Omnidirectional for forgiving pick-up of users that may not be committed to the mic
- Low impedance (600 ohms) for long cable runs and hum resistance
- Rugged polyester mic element resists effects of extreme temperature, moisture, acids, alkalines, and solvents
- Durable large-gauge wire grille
- Molded plastic that is resistant to high impact
- Permanently-attached 6', heavy-duty, 4-conductor coiled cord with stripped and tinned ends
Save BIG when you buy today!
Astatic by CAD Small Format Omnidirectional Dynamic Handheld Microphone with Switch
Specifications:
- Operating Principle: Moving Coil Dynamic
- Polar Pattern: Omnidirectional
- Frequency Response: 500Hz - 8KHz
- Sensitivity: -49dBV (3.6mV) @ 1Pa
- Impedance: 600 ohms
- Cable: 6' extended, four-conductor, two-conductor shielded, coiled
- Switch: DPDT momentary leaf
- Case: Impact-resistant plastic
- Net Weight: 4.9 oz.
- Packaged Weight: 8.0 oz.
- RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4
- RoHS Compliant
|
|
|
|