|
|
|
|
|
An extremely affordable 4-channel, 120W PA system with 2 full-range, 2-way speakers.
The Harbinger HA120 portable PA system is a ready-to-go 120W system that provides big sound in a simple
PA package for small rooms and intimate venues. It includes 4-channel powered mixer, 2 - 12" 2-way speakers, and 2 - 20' speaker
cables. All 3 pieces are built with rugged, ozite-covered wood enclosures.
Harbinger HA120 Portable PA System Features:
- 4 mono mic/line input channels with XLR and 1/4" jacks
- 2 full-range, 2-way speakers with real compression drivers
- Built-in 120W power amplifier (max.output)
- Built-in Digital Delay
- Stereo AUX Input for CD or MP3 players with level control
- 3-band master EQ
- Stereo REC Output feeds tape decks, computers, CD burners, etc.
- 2-Band EQ at mono channels
- Record out
- Volume, EQ, and Effect send on every channel
- Built in stand mounts
- Includes 2 - 25' speaker cables
- All housed in rugged cabinets
Order this power amp/2-way speaker combo today!
Harbinger HA120 Portable PA System Specifications:
- Power Amp
- Max Output Power (watts): 8Ω-88
- Minimum Output Power (watts) 4Ω-120
Inputs
- Balanced mono: 4 Mic/line channels, 2 Aux Inputs
Outputs
- Record Out RCA Pair
Channel Strips (4)
- Volume Controls: Rotary
Master Section
- Rotary Fader: Master
Built-in Digital Effect
- Digital Delay (2-150ms)
Noise
- Bandwith-20Hz to 20kHz (line inputs to master output)
- Master output (all faders down): -86dBu
- Power amp output, all faders down: -55dBu
THD
- Power output, 20Hz to 20kHz: 20Hz to 20kHz
- @120W 4Ω <1%
Crosstalk (1KHz@ 0DBU)
- 20Hz to 20kHz bandwidth, channel in to master output
- Channel fader down < -63dB
Frequency response (Mic input to output)
- 20Hz to 20kHz line level o/p @+4dBu into 600Ω +1/-3dB
- 20Hz to 20kHz Power amp o/p 1 watt into 8Ω +1/-3dB
Sensitivity @ Mixer Output +4DBU
- Mic/Line: -50dBu/-35dBu
- Tape in: -6dBu
Channel Equalization
- 2 band ±15dB
- Low EQ: 80Hz
- Hi EQ: 12kHz
Microphone Preamp E.I.N.
- (150Ω terminated, maxgain) -122dBm
Power Requirements
- 120V, 60Hz
Dimensions (WxHxD)
- 18.9"x 8.85"x 5.9"
Weight
- 19 lb.
Speaker Specifications
- RMS Power handling: 80W/8 Ω
- Peak Power handling: 110W/8Ω
- Impedance load: 8Ω
- Horn construction: Compression Driver
- Woofer construction: 12" cone diaphragm
- Magnet weight: 30 oz.
- Crossover; 3.8K / -12dB per octave
- Frequency response: 40Hz-20kHz, SPL 96dB ±2dB
- Max SPL: 116dB
- Dimensions of speaker box (HxWxD): 23.2" x 14.4" x 12.8"
|
|
|
|
|
|
|