|
|
|
|
|
The Line 6 X2 XDR4 Rackmount Single Channel Receiver comes with a power supply and is a component of
the XDS95 24-Bit Digital Instrument Wireless System from the XD Series.
The X2 XDS95 24-Bit Digital Instrument Wireless
System is a breakthrough in wireless sound and performance that's 2009 Compliant and features both an instrument input for
guitar/bass and a microphone input on the transmitter that provides 9V DC bias power for lavalier or headworn microphones
from various manufacturers including, Audio-Technica, Countryman, Shure, Sennheiser, Audix and others. The XDR4 receiver comes
with an owners manual that includes a detailed wiring diagram and connector requirements.
Line 6 X2's proprietary digital
technology provides superior fidelity while the XDS95's "stomp-box" style receiver houses a micro-processor that selects the
digital data stream from among the four internally mounted Q-diversity™ antennas to eliminate dropouts and interference
including DTV. You'll enjoy the sound and performance of a direct wire connection free from compander ICs — and the
associated 'pumping' and 'breathing' — that squash your tone, as well as other problems associated with analog wireless
technology.
Line 6 X2 XDR4 Rackmount Single Channel Receiver for the XDS95 System Includes:
Save BIG when you buy today!
Line 6 X2 XDR4 Rackmount Single Channel Receiver for the XDS95 System Specifications:
- D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
- Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
- Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground,
XLR Balanced 600 ohm
- LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
- Controls: Power On/Off, Channel/Mode Select
- Dimensions: 1.75 H x 16.2 W x 7.5 D in.
- Power Requirements: 9V DC 500mA via included AC/DC adapter
- Weight: 2.5 lbs (with rack hardware and antenna installed)
- Housing: Polycarbonate, impact tested to 300 lbs.
|
|
|
|
|
|
|