Provides the many advantages of a complete in-ear monitoring system.

This PSM400 Wireless Personal Monitoring System includes a P4T wireless transmitter, a P4M four channel personal monitor mixer, a P4R Receiver, and a set of SE115-CL Earphones. When used together this complete system provides the many advantages of an in-ear monitoring system, including:
•Improved Sound Quality - high fidelity without the risk of feedback
•Increased Mobility - your mix moves with you
•Personal Control - through volume adjustment and MixMode

P4T Wireless transmitter with removable antenna
•Built-in audio limiter, External power supply, Remotable/combinable antennas, 1/2 rack space
•Operating Controls: Earphone volume knob, Frequency select LED Indicators: 4-segment input level, Transmission Frequency
•Inputs: Two 1/4" TRS line level
•Outputs: Two 1/4" TRS loop outs, Local earphone monitor

P4M four channel personal monitor mixer
The P4M is a highly versatile four-channel, two-bus stereo mic/line mixer designed to optimize use of personal (in-ear) monitors. It features four balanced mic/line inputs, each with level and panning controls. Corresponding XLR split outputs allow input signals to pass through the unit unaffected, while providing an independent mix.

P4R Wireless Bodypack Receiver
•High-impact plastic chassis, Frequency locator
•Operating Controls: Operating mode (Stereo, Mono, MixMode), Volume & Balance knobs, Defeatable limiter, High-frequency boost, Frequency select
•Backlit LCD Indicators: RF reception, Battery life, Operating mode, Frequency

SE115-CL sound isolating earphones
The compact SE115-CL is a perfect introduction to the stunning performance of Shure earphones. Second Generation Dynamic MicroDrivers deliver warm, detailed sound with resonant bass. This clear model has a 64-inch fixed cable making it ideal for stage use or other low-profile applications.

Shure PSM400 SE115-CL Wireless Pack Features:

• P4T
• RF Frequency Range: 722 to 952 MHz (country dependent)
• Operating Range: 300 feet (91.44 meters) (environment dependent)
• RF Output Power: 50 mW (+17 dBm) typical conducted (country dependent)
• Modulation Limiter: Internal peak limiter (>10:1 compression)
• Antenna: External whip, 50 BNC connector
• Dimensions: 219.2 mm X 43.6 mm X 136.5 mm (8.63 in. X 1.718 in. X 5.375 in.)
• Net Weight: 907.2 g (2 lbs., 0 oz.)
  
  P4M
• Frequency Response: (Ref 1 kHz, controls centered) 20 Hz to 20 kHz ± 2 dB
• 1/2 rackspace
• 4 level controls
• 4 balance controls
• 4 XLR/1/4" mic/line inputs
• 2 - 1/4" TRS aux inputs
• 4 split controls
• 2 XLR/1/4" TRS mix outputs
• External power supply
  
  P4R
• RF Frequency Range: 722 to 952 MHz (country dependent)
• Operating Range: 300 feet, 91.44 meters(environment dependent)
• Audio Frequency Response: 50 Hz to 12 kHz (+/- 3 dB)
• RF Sensitivity: 1 mV typical
• Image Rejection: 55 dB typical
• Spurious Rejection: 60 dB typical
• Squelch Threshold: 4.5 mV typical
• Antenna: attached whip
• Power Requirements: 9 V alkaline battery
• Battery Life: up to 8 hours, volume dependent
• Audio Output Connector: 3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve)
• Minimum Load Impedance: 16 ohms
• Net Weight: 125 g (.28 lbs.)
• Overall Dimensions: 82.6 mm X 63.5 mm X 26.2 mm (3 1/4 in. X 2 1/2 in. X 1 1/32 in.)
  
  SE115-CL
• Speaker Type: Dynamic MicroDriver II
• Sensitivity (1mW): 105 dB SPL/mW
• Impedance (1kHz): 16 Ω
• Frequency Range: 22Hz – 17.5kHz
• Cable Length: 64 inch fixed cable

Get this complete system to enhance your experience on stage. Order today.