|
|
|
|
|
The Shure MC50B is an omnidirectional subminiature, electret condenser Lavalier microphone. It provides
uncompromised sound quality and high reliability with minimal visibility in sound reinforcement applications such as television
broadcasting and stage performances. Despite its small size, the Microflex microphone's condenser element provides full, clear
and natural reproduction of speech.
The MC50B omnidirectional model is supplied with two types of equalization caps
for high frequency response shaping. The mild boost equalization cap attenuates the natural high frequency peak of the microphone.
The high boost cap does not attenuate the high frequency peak. The MC50B mic is also supplied with two foam windscreens to
minimize wind noise. Included mounting accessories consist of a lapel clip, a tie clip, a pin mount, and a magnet mount, giving
you a wide variety of options for placement.
Shure MC50B Microflex Lavalier Microphone Features:
- Extended frequency response with user changeable equalization caps for response shaping (omni only)
- Low visibility with a variety of options for mounting
- Low handling noise
- Legendary Shure quality, ruggedness, and reliability
- Includes In-line preamplifier and 5-foot (1.5m) cable with TA4F connector
- All foam windscreens
Save BIG when you buy today!
Shure MC50B Microflex Lavalier Microphone Specifications:
- Type: Condenser (electret bias)
- Polar Pattern: Omnidirectional
- Output Impedance (at 1,000 Hz): 136 ohms actual (rated at 150 Ohms)
- Output Level (at 1,000 Hz): -41 dBV/Pa (1 Pa = 94 dB SPL)
- Maximum SPL: 138 dB at 1% THD/ 1 kilohm load
- Frequency Response: 20 to 20,000 Hz
- Dynamic Range: 108.0 dB
- Output noise (equivalent SPL, A-weighted): 30 dB typical; 34 dB maximum
- Signal-to-Noise Ratio: 64 dB at 94 dB SPL
- Power Requirements: 11 to 52 Vdc (positive on pins 2 and 3, return on pin 1)
- Current Drain: 4.6 mA
- Polarity—Positive pressure on the diaphragm produces a positive voltage at:
- pin 2 relative to pin 3 of the output connector of preamplifier
- Overvoltage Protection: ±75.0 Vdc maximum from pins
- 2 and 3 to pin 1
- Cap and Overmold material: Polypropylene
- Environmental Conditions: Operating Temperatures: —18 to 57 degrees C (0 to 135 degrees F);Storage Temperatures:
—29 to 74 degrees C (—20 to 165 degrees F); Humidity: 0 to 95%
- Cable and connector: 1.5 m (5 ft) extended length small-diameter, shielded, with miniature female 4-pin connector (TA4F
type)
- Dimensions (Length x diameter): 5' (including cable) x 3 .23" (1.52 x 5.8 mm)
- Net Weight: 4.3 oz. (121 g) with cable, connector, and preamplifier
|
|
|
|
|
|
|