|
|
|
|
A performance amplifier with a high protection grade that's developed and designed for small installations,
DJs, and bands.
The VX2500 power amp from the VX-series is the successor generation of American Audio's VLP-series amplifiers.
They are professional performance amplifiers with a high protection grade that's developed and designed for small installations,
DJs, and bands. The American Audio VX1000's multifunctional display allows a full overview of functions and settings, plus
it's easy to navigate and self-explanatory. Special attention is given to every aspect of the VX amplifiers for the highest
reliability.
With outstanding sound performance, built-in sound dynamic processing circuitry, and a superior clip limiter, the VX1000 power
amp gives users a wide variety of possibilities. Featuring a solid case design housed in 3-millimeter steel plus back ears
for mounting in a rack, VX Series amps enable day-by-day use on the road, as well as fixed use in installation racks.
American Audio VX2500 Power Amp Features:
- Bright LCD display: shows temperature, working mode, and protection mode
- CPS: comprehensive protection system: an auto shut down protects amplifier from overheating
- Dynamic sound circuitry: improves dynamic range and quality of sound
- Fan: 2-speed fan
- Modes: stereo, parallel, or bridge mono
- Protection circuit: DC output protection, overload protection, high temp protection, short circuit protection, current
inrush protection, soft startup protection
- Dimensions: 3-1/2" H x 19" W x 19-1/2" D
- Weight: 52 lb.
Order today and get a power amp with a multifunctional display, a full gamut of functions
and settings, plus easy-to-navigate and self-explanatory operation.
American Audio VX2500 Power Amp Specifications:
- Output Power:
- 2 Ohms, 1 khz 1% THD 1400W RMS per channel
- 4 Ohms, 1 khz 1% THD 1200W RMS per channel
- 8 Ohms, 1 khz 1% THD 750W RMS per channel (Bridged Mode, mono)
- 4 ohms, 1 khz 1% THD 2800W RMS per channel
- 8 ohms, 1 khz 1% THD 2400W RMS per channel
-
- Total Harmonic Distortion (THD): less than 0.5% (20Hz-20kHz, @ 8 Ohms)
- Input sensitivity and impedance: 1.0v rms (0 dBv) (@ 4 Ohms)
- Frequency response: ±3dB, 1W RMS 8 Ohms (20Hz - 20kHz)
- Signal to noise ratio: Less than 95 dB, unweighted (@ 8 Ohms full power)
- Slew rate: 15v/usec
- Damping factor: 500 (@ 8 Ohms)
- Power consumption: 5A @ 120V AC (@ 8 Ohms)
|
|
|
|