A flute miking system for the studio.
The AMT Z1 Studio version combines the smallest and only specific flute microphone system on the market
with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance. It regulates the voltage to each microphone,
and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order
to maintain the most natural reproduction of sound and the most gain before feedback in a live applications. An XLR low-impedance
balanced output sends a mic level signal.
The AMT Z1 is a hardwired single microphone made for flute. It is the
perfect choice for soft or louder playing applications. It can be used for featured soloist or miking a section of flutes.
This studio version is meant to be used either in a studio setting where close miking of an instrument is desired or in a
professionalsetting where a sound engineer controls the microphone.
Requires phantom power.
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System Features:
- AMT Z1W Microphone
- AMT AP40 floor pre-amp
- Hard shell protective case
The flute mic of choice for critical applications. Order today.
Applied Microphone Technology AMT Z1 Studio Clip On Condenser Microphone System
Specifications:
- Element: Condenser
- Polar Pattern: Cardioid
- Frequency: 50Hz - 20kHz
- Sensitivity: -65dB+ 4dB
- Impedance: 150 Ohms
- Phantom Power: 12 to 52 vDC or 9 volt battery
- Max input SPL: 139 dB
- Dimension: 2" Flex Arm
- Cable: 10'
- Weight (Mic only): 22 grams