Makes the choir sound like angels.
The Astatic 900 is a superior low noise, electret condenser cardioid choir microphone.
The hanging
microphone has a wide, flat frequency response which provides unsurpassed, natural, transparent sound quality. Its cardioid
pickup pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the
pickup of unwanted off axis sounds.
The 900's electronics are located externally in a housing that also contains the
professional three-pin male XLR connector. The Astatic 900 is attached to this with a 30' cable terminated with a mini three-pin
XLR. It is finished in durable black urethane paint. The 900 mic features a .022"-diameter hole placed directly behind the
microphone head that facilitates the use of monofilament line to inconspicuously fix the position of one or a series of microphones.
Order today and have unsurpassed natural sound.
Astatic by CAD 900 Overhead Hanging Microphone Specifications:
- Operating Principal: Electret Condenser
- Polar Pattern: Cardioid
- Frequency Response: 150Hz - 20kHz
- Impedance: 440ohms
- Self Noise: 26dBA
- Max SPL: 132dB
- Open Circuit Voltage: -50 dB (0 dB = 1 volt per microbar)
- Dynamic Range: 100 dB
- Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
- Current Required: Less than 2.0 mA over operating voltage range
- Power Requirements: P12, P24, P48, 2mA
- Phasing: Positive Pressure on Diaphragm generates a positive voltage on pin 2 relative to pin 3
- Finish: Durable black urethane paint
- Cable: 900 - Miniature black cable with miniature 3 pin connector
- NET Weight: 7.2 oz. (205 grams) including external mic electronics