2 of Audio-Technica's renowned 40 Series studio condenser mics.

The Audio-Technica AT4040SP Studio Pack offers you two of A-T's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser mic and the AT4041 cardioid condenser.

Each microphone is transformerless, resulting in exceptional transient response, and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. Audio-Technica includes a shock mount, stand clamp and windscreen along with a protective vinyl carrying case with this mic pack.

Requires phantom power.

Audio-Technica AT4040SP Studio Microphone Pack Features:

• AT4040SP Studio Pack includes:
  
• The AT4040 side-address cardioid condenser microphone
• The AT4041 cardioid condenser microphone
• The AT8449 shock mount,
• The AT8405a stand clamp
• The AT8159 windscreen
• A protective vinyl storage case
• About the AT4040 Side-address cardioid condenser microphone:
• Technically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
• Externally polarized (DC bias) true condenser design
• Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Switchable 80 Hz hi-pass filter and 10 dB pad
  
  AT4041Cardioid condenser microphone:
• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• State of the art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
• Switchable hi-pass filter and rugged turned-brass microphone housing

Why wait to get your studio rolling with this incredible Mic Pack! Order this today!

Audio-Technica AT4040SP Studio Microphone Pack Specifications:

• The AT4040 specs:
• Element: externally-polarized (DC bias) condenser
• Polar pattern: cardioid
• Frequency response: 20-20,000Hz
• Low frequency roll-off: 80Hz, 12dB/octave
• Open circuit sensitivity: -32dB (25.1 mV) re 1V at 1 pa
• Impedance: 100Ω
• Maximum input sound level: 145dB SPL, 1kHz at 1% T.H.D.;
• 155dB SPL, with 10dB pad (nominal)
• Noise: 12dB SPL
• Dynamic range (typical): 133dB, 1kHz at max SPL
• Signal-to-noise ratio: 82dB, 1kHz at 1 pa
• Phantom Power requirements: 48V DC, 4.2 ma typical
• Switches: flat, roll-off;
• 10dB pad (nominal)
• Weight: 12.7oz. (360g)
• Dimensions: 6.69" (170.0mm) long,
• 2.10" (53.4mm) maximum body diameter
• Output connector: integral 3-pin XLRm-type
• Accessories furnished: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
• Audio-Technica case style: R1
  
  The AT4041 specs:
• Element: fixed-charge back plate, permanently polarized condenser
• Polar pattern: cardioid
• Frequency response: 20-20,000Hz
• Low frequency roll-off: 80Hz, 12dB/octave
• Open circuit sensitivity: -36dB (15.8mV), re 1V at 1 pa
• Impedance: 100Ω
• Maximum input sound level: 145dB SPL, 1kHz at 1% T.H.D.
• Dynamic range (typical): 121dB, 1kHz at max SPL
• Signal-to-noise ratio: 70dB, 1kHz at 1 pa
• Phantom Power requirements: 48V DC, 3.2 ma typical
• Switch: flat, roll-off
• Weight: 4.2oz. (120g)
• Dimensions: 6.28" (159.5mm) long,
• 0.83" (21.0mm) body diameter
• Output connector: integral 3-pin XLRm-type
• Accessories furnished: AT8405a stand clamp for 5/8"-27 threaded stands; at8159 windscreen; protective carrying case
• Audio-technica case style: S1