Large diaphragm studio condenser microphone with switchable -10 db pad and bass roll-off.

This is a matched pair of CX-112 large diaphragm condenser microphones. CX-112 microphones have a contemporary design and excellent performance characteristics, and are an exceptional tool for professional audio production, project studios and live stage performances. Delivering a smooth, uniform frequency response from 20Hz - 20kHz, each Audix CX-112 offers a rich, full-bodied sound delivered by its one-inch capsule.

The CX-112 condenser mic is equipped with a bass roll-off filter to help eliminate rumble and hum in the lower frequencies and a -10 dB pad to achieve higher sound pressure levels without distortion.

Designed to capture a wide variety of acoustic instruments, the CX-112 is the perfect recording mic for vocals, string sections, guitar, ensembles, guitar cabinets, ambient room miking and live stages.

The CX-112, which is designed with discreet low noise preamp circuitry, operates on phantom power of 48-52 volts. Optimum results will be achieved by using the Audix CX-112 with a high quality mic preamplifier and premium quality microphone cable.

Audix CX112-MP Large Diaphragm Condenser Matched Pair Features:

• Gold-sputtered diaphragm
• Low noise electronic
• -10 dB pad and bass roll-off
• Rich warm tones & mdash; ideal for digital recording
• High powered handling of 145 dB SPL
• Adjustable metal clip allows for secure positioning
  
  Applications:
• Studio vocals, lead and backing
• Voice over
• Choir
• Ambient room mic
• Drum overheads
• Orchestra
• Bells, chimes, marimba, vibes
• Acoustic instruments
• Electric guitar cabinets

Get beautifully imaged stereo recordings with this pair of studio mics.

Audix CX112-MP Large Diaphragm Condenser Matched Pair Specifications:

• Type: Condenser
• Capsule Technology: 1.07"/27mm Gold Vapor Diaphragm
• Frequency Range: 20 Hz — 20 kHz (±3dB))
• Polar Pattern: Cardioid
• Frequency Response: 20Hz - 20kHz
• Impedance: 200 ohms
• Sensitivity @1k 22 mV/Pa: 14 mV / Pa @ 1k
• Noise Floor: 18 dB (A Weighted)
• Signal to Noise Ratio: 76 dB
• Maximum SPL: >145 dB
• Dynamic Range: 127 dB
• Power Requirements: 48-52 volts Phantom
• Connector: 3 Pin Gold Plated Male XLR
• Weight: 16 Ounces (450 g)
• Length: 6.42 Inches (163 mm)