A professional studio condenser microphone set with an elegant design and a patented capsule suspension system

The Audix SCX25A-MP large diaphragm condenser microphone is uniquely shockmounted within an intricate machined brass ring. Its capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.

With a smooth uniform frequency response from 20Hz - 20kHz, the SCX25A is very consistent when responding to on and off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. The SCX25A condenser mic is characterized with a wide cardioid polar pattern, which enables the sound engineer the opportunity to blend the sound of the instrument or vocal with the sound of the room. Other features include a one-inch (25 mm) gold vapor capsule, miniaturized electronics, and an extremely small footprint. The SCX25A will handle sound pressure levels in excess of 135 dB and will provide up to 20 dB of ambient noise rejection.

In addition to vocals, the Audix SCX25A microphone is ideally suited to capture acoustic instruments such as piano, guitar, vibes, woodwinds, brass, percussion toys, drum overheads, orchestra and symphony sectionals.

The SCX25A features a precision machined brass body, innovative capsule suspension system, steel mesh grill, black e-coat finish, laser etched model and serial number, Switchcraft XLR connector, and heavy duty nylon clip, making it a state-of-the-art recording mic manufactured to exacting standards and tight tolerances.

Audix SCX25A-MP Large Diaphragm Condenser - Matched Pair Features:

• Innovative Design
• Isolated Capsule Suspension System
• Low Noise Electronics
• Extremely Small Footprint With A Brass Body Only 4" Long
  
  Applications:
• Studio Vocals
• Voice Over
• Choirs
• Piano
• Drums
• Overheads
• Sax
• Guitar

Get beautifully imaged stereo recordings with this pair of studio mics.

Audix SCX25A-MP Large Diaphragm Condenser - Matched Pair Specifications:

• Type: Condenser
• Polar Pattern: Cardioid
• Frequency Response: 20Hz - 20kHz
• Impedence: 200 ohms
• Sensitivity @1k 22 mV/Pa: 28 mV / Pa
• Equivalent Noise Level: 14 dB (A Weighted)
• Signal to Noise Ratio: 80 dB
• Maximum SPL: >135 dB
• Dynamic Range: 121 dB
• Power Requirements: 48-52 volts Phantom
• Connector: Switchcraft Male XLR
• Weight: 8.6 Ounces (244 g)
• Length: 5.8 Inches (148 mm)