Now you and your audience can enjoy the same sterling, high-definition sound!
The L1 Model I Dual System/Dual Bass Package includes two Bose L1 Model I Cylindrical Radiator Speakers,
two Bose L Model I Power Stands, and two Bose B1 Bass Modules.
L1 Model I Cylindrical Radiator Speaker
The L1 Model I Cylindrical Radiator Speaker is an integral component of the from Bose L1 Model One PA system. This innovative
system projects clean, detailed sound evenly across the stage and throughout an audience of up to several hundred, with little
change in tone or volume and eliminates the need for conventional monitors, mixers, and PA speakers. It is the ultimate in
fidelity and is extremely lightweight and portable.
The unique Cylindrical Radiator loudspeaker comes in two sections
and has a line array of 24 small drivers mounted into a vertical speaker enclosure for wide, horizontal sound coverage. This
proprietary design helps fill the room with clear sound like no ordinary audio speaker can. In comparison to a conventional
speaker, volume and tone diminish very slowly over distance.
The loudspeaker's wedge-shaped dispersion pattern sends
little sound to the floors, upper walls and ceilings, minimizing room reverberation and increasing clarity. In contrast to
a conventional setup, the Bose L1 system lets you, your fellow musicians and the audience hear the same sound. You don't need
any other stage monitors, mixers or PA speakers. The L1 system replaces them all with one sleek, powerful setup.
The
L1 Cylindrical Radiator loudspeaker features a two-piece, interlocking design for quick and easy transport, setup and breakdown.
Each section of loudspeaker is 43 1/2" (1.1 m) high. It includes an interlocking bayonet with center and bottom latches.
L1
Model I Power Stand
As well as being the mechanical support for the Bose L1 Cylidrical Radiator loudspeaker, the Bose L1 Model I Power Stand houses
the amplifier and mixer for the 4-channel system L1 system. This innovative system eliminates the need for conventional monitors,
mixers, and PA speakers. It is the ultimate in fidelity and is extremely lightweight and portable. Features of the PS1 Power
stand include:
Integrated power amplifiers:
Provide clean, precise amplification for L1 Model I loudspeaker and up to two B1 bass modules. Musicians can play soft or
loud with confidence the system will accurately amplify their performance.
Four-channel mixer:
Primary mic/line input channels 1 and 2 accept XLR and 1/4" TRS connections; they feature ultra-low noise preamps, two-stage
clip lights, trim controls and XLR line-out channels. Secondary input channels 3 and 4 accept 1/4" unbalanced line-level sources
like keyboards, sequencers, mixers and MP3 players.
ToneMatch® presets:
Proprietary ToneMatch presets optimize Bose L1 system to match intended natural sound of specific instruments and microphones
on channels 1 and 2. Select presets independently for these channels using pushbutton controls.
Channel inserts/effects
loops:
Connect channels 1 and 2 to external effects and processors via 1/4" TRS line input/output connections. Use a stereo plug
to connect the send and return signals with one cord.
Bass module out:
Delivers amplified bass output signal to one or two B1 bass modules. L1 speaker system automatically adjusts equalization
appropriately when bass modules are connected.
Bass line out:
Post-DSP bass signal output. Accepts 1/4" TRS phone cable. Use to connect PackLite amplifier with up to two additional bass
modules. Can also be used to connect powered subwoofer or additional amplification system.
Digital data out:
Send digital mix of channels 1 and 2 to external recording gear at 48KHz sample rate.
Digital data in:
Update product software and ToneMatch presets via this digital input connector.
R1 remote input:
Seven-pin connection works with R1 remote control( sold separately).
B1 Bass Module
The Bose B1 Bass Module works seamlessly with the L1 Model I PA System to deliver the low-frequency impact you want through
2 high-output, high-excursion 6-1/2" drivers. It produces deep, strong bass for keyboards, kick drum, bass guitar, and other
instruments that play in the baritone/bass range. Light and compact, strong bass is yours without the bulk and weight of traditional
subwoofers. Connects to the PS1 power stand with a single cable.
Bose L1 Model 1 Dual System/Dual Bass Package Features:
- strong>L1 Model 1 Cylindrical Radiator Speaker
- Cylindrical Radiator and Articulated Array technologies
- Two-piece, interlocking design
- Eliminates the need for conventional monitors and PA speakers
- Musicians and the audience hear the same sound
L1 Model 1 Power Stand
- 4-channel mixer
- 250 Watts to upper section & 250 Watts to lower section of the L1 cylindrical speaker column
- Two combination XLR-1/4" inputs (channels 1 and 2)
- Two 1/4" line inputs (3 and 4)
- Two XLR outputs (1 and 2)
- Two TRS inserts/effects loops (1 and 2)
- Neutrik NL4 bass module output
- 1/4" bass line output
- Digital data in
- Digital data out
- R1 remote in
R1 Remote
- Tone controls (channels 1 and 2) - High, mid and low tone controls, each with -12 dB cut to +12 dB boost
- Level controls and signal/overload LEDs (1 and 2) - Adjust input signal levels. Green/red LEDs show signal status and
help you set proper gain levels
- Master level - Adjust volume of all four input channels simultaneously
Bass support for L1 Model I Cylindrical
Radiator loudspeaker
- 2 high-output, high-excursion 6-1/2" drivers
- Light and compact
- Connects to the L1 Model I Power Stand with a single cable
- System power: 250W
Order today with the protection of our 45-day lowest price and total satisfaction guarantees!
Bose L1 Model 1 Dual System/Dual Bass Package Specifications:
- L1 Model I Cylindrical Radiator Speaker top
- Dimensions: 43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
- Weight: 14.5 lbs (6 kg)
L1 Model I Cylindrical Radiator Speaker bottom
- Dimensions: 43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
- Weight: 16.0 lbs (7 kg)
L1 Model I Power Stand:
- Dimensions: 26"W x 5"H x 26"D (12.7 x 66 x 66 cm)
- Weight: 35 lbs. (16kg)
R1 remote
- Dimensions: 1-3/5"H x 2 4/5"W x 5 3/5"D (4.0 cm x 7.1 cm x 14.1 cm)
- Weight: 0.6 lbs (0.27 kg)
B1 Bass Module
- Dimensions: 10-3/10"W x 15-3/10"H x 18"D (38.0 x 25.0 x 45.7 cm)
- Weight: 28 lbs. (13 kg)