Boutique-style 30W class-A valve combo with valve rectifier.
The BC30-212 tube guitar amp is a musical instrument unto itself; it's the complement your guitar has
always lacked, and the extra band member you've always needed. That's because unlike most amps, the BC30-212 actually communicates
with you and your guitar, responding to the subtle characteristics of your playing technique and giving your creativity a
voice all its own.
It's a concept that forced Bugera to concentrate on the essence of tone and dynamics. As is often
the case, it is the simple, straightforward design of this tube amplifier, combined with the most refined components available,
which yields the highest fidelity and most dynamic response. In the end, Bugera succeeded in creating a 30W amp that will
change how you play and perfect your sound.
The Bugera BC30-212 amplifier is the ultimate in tonal purity. The preamp
conditions your signal then lets the power amp and speakers have their way with it. The amp becomes an extension of your guitar
and your fingers - no channel switches or signal boosting devices to change the tone. Instead, you control the amp from the
guitar; your dynamic nuances, picking technique, pickups, volume control, and tone knobs determine the sound you hear. Pick
gently for crystal-clear clean tones. Pick hard, and you'll be rewarded with bone-shattering crunch. It's that simple.
power amp section of the tube amp feature four EL84 valves, the highly reactive, breakup prone secret to the sound that made
England's finest amps (and guitarists) world famous. With the simple flick of a switch, you can choose two EL84's (15 W) or
all four (30 W), giving the BC30-212 the power to restrain volume for smaller venues, or peel the paint off the walls in larger
In short, the Bugera BC30-212 guitar amp thinks the way you do. And in true Bugera fashion, it offers you a
multitude of ways to customize its voice to meet your sonic tastes.
The power amp works hand-in-hand with the Bugera
BC30-212's all-valve rectifier to give you natural compression and sustain not available from solid-state rectifiers. Put
simply, a rectifier converts the Alternating Current (AC) entering your amp into the Direct Current (DC) it needs. Most modern
amps have silicon based rectifiers that quickly convert the current, so when you strum a power chord, it bursts out big and
loud, then decays. But a valve rectifier converts current at a slower rate, which means when you hit that same huge chord,
you still get that powerful response, but the notes naturally compress and sustain much longer.
The kind of rectifier
you choose has a lot to do with your sound. That's why Bugera provide two options on the BC30-212: use a single 5AR4 rectifier
to deliver bigger-than- life stadium rock; or plug in a pair of 5U4's (not included) for a smoother, more-buttery sound.
rectifier and power amp are the BC30-212 combo amp's heart and soul, respectively, but the preamp works to predispose your
sound to cleanliness or high-gain grind. When you're at your job and your workload is too heavy, you probably get a bit angry
and likely do a little (or a lot of) griping. Valves work in much the same manner, except when one of them is overworked,
the sound they make is often perceived as "totally kick-ass" instead of "bitching and moaning."
Bearing that in mind,
the Bugera BC30-212 amplifier's first channel holds a pair of 12AX7s, the V1 stage of which creates a parallel triode circuit.
More tubes share the workload, so the signal it conditions is tamer. Channel 2, on the other hand, holds a single ECC83A valve
that works in a cascading dual-triode configuration. The accompanying 6-position tone switch allows you to dial-in a tone
that can become beautifully disgruntled (or high-gain, in amp-speak) in a hurry.
Both channels on this Bugera amp feature
their own effects loop. You can also use these loops to create a virtual third channel. By using a short 1/4" instrument cable
to patch the Channel 2 Effects Send into the Channel 1 Input, you can take advantage of increased gain and use the Channel
2 tone control to govern the sound.
Another feature unique to the BC30-212 is its two different 12" speakers. One,
the 12G100B8, creates a high-sensitivity, in-your-face sound. Bugera went to considerable lengths in its quest for tone, tweaking
the suspensions, cone shape, and even optimizing the pulp from which the cone is made. Bugera did all this at its in-house
speaker plant, achieving the most mature and fullest guitar sound possible, which definitely possesses hair-raising bark.
The other speaker, a 12G80A8, is slightly less sensitive, but with a warm, round low end and clear midrange. Individually,
these speakers can easily hold their own against the most highly acclaimed speakers on the market. Together, they create a
tonal balance that is unsurpassed.
In addition to sounding great on stage, this configuration offers tons of flexibility
to sound engineers both in recording studios and for live performance applications. And if you need to use additional speaker
cabinets, the Impedance switch can be set to 4, 8 or 16 Ohms, making it compatible with virtually any speaker cabinet on Earth.
amp with as much intuitive ability as the BUGERA BC30-212 would normally cost you about as much as a car! But because Bugera
believes all musicians should have access to this caliber of equipment, it has managed to create a sophisticated, beautifully
voiced and durable instrument that will leave you with more than enough gas money to get to your next gig. Plug into a BC30-212
and create a sound that's thoroughly your own.
Bugera BC30-212 30W 2x12 Tube Guitar Combo Amp Features:
- Hand-built 30-Watt Class-A guitar combo driven by 4 x EL84 valves
- Mind-blowing distortion with terrifying punch and breathtaking vintage clean that breathes with headroom
- True valve rectifier gives you the flexibility of using one 5AR4 for a explosive attack or two 5U4s (not included) for
a smooth and round response
- Channel 1 features two 12AX7s creating a parallel triode circuit and an interactive EQ with amazing responsiveness
- Channel 2 sports a high gain channel based on a specially selected 12AX7 valve coupled to a 6-position tone switch
- Power amp section features a Cut control for rolling off the high end plus a Master volume control
- Power switch reduces output power to 15 Watts for more sound variation
- Speaker Reverse switch reverses the direction of the speaker to influence the amount of distorted sound
- Each channel offers an independent effects loop
- Illuminated front panel and logo for a super cool look
- Impedance switch (4, 8 and 16ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
Save BIG when you buy today!