 |
|
 |
|
With world class power, value, and exceptional sound quality.
The 4000 Watt Power Amplifier from Crest Audio is built with tunnel-cooled heat sinks, variable-speed
DC fans and extensive protection circuitry for superior efficiency into difficult loads and power conditions. The robust CC
4000 boasts more power devices (16 per channel) than any competitive amplifier, plus a switched-rail class H output stage
and triple-compound design to provide low distortion and excellent thermal stability. Utilizing a linear power supply The
CC 4000 power amp delivers stable high power output for running main systems, monitors and subwoofers.
Crest Audio CC 4000 4000W Power Amplifier Features:
- Toroidal power transformer
- Magnetic circuit breaker on/off switch
- Cooled by Dual variable speed fans with back-to-front airflow
- Mode selector switch for stereo, parallel and bridged-mono operation
- Input sensitivity selection
- Balanced female XLR, 1/4" TRS combi jacks inputs
- Speakon and five-way binding post outputs
- Recessed, stepped attenuators
- Front panel circuit-breaker switch
- 16-gauge steel chassis, cast aluminum front panel
- Five-year warranty
Save BIG when you buy today!
Crest Audio CC 4000 4000W Power Amplifier Specifications:
- Stereo Power 8 Ohms: 800 Watts
- Stereo Power 4 Ohms: 1,350 Watts
- Stereo Power 2 Ohm: 2,000 Watts
- Bridged Power 4 Ohm: 4000 Watts
- Output Voltage RMSD: 93 V
- (8 Ohm and 4 Ohm Stereo Power ratings @1kHz, <0.05% THD+N both channels driven 2 Ohm stereo & 4 Ohm Bridged Mono Power
ratings @1 kHz, <0.1%THD+N)
- Frequency response: 10 Hz — 100 kHz; +0, -2 dB at 1 watt
- Power bandwidth: 10 Hz — 35 kHz; +0, -3 dB at rated 4 Ohm power
- Damping factor (8 Ohm @ 20 Hz to 1 kHz): 500:1
- Input CMRR @ 1khz: > -65 dB
- Gain: selectable between x40 (32 dB) and x20 (26 dB)
- Input sensitivity (x40): 1.88 V ± 3% for 1 kHz, 4 Ohm rated
- power
- Input impedance: >15kohms balanced
- Hum and noise (A-weighted below rated power @ 8 ohms): > -112db
- Crosstalk (1kHz @ rated power 8 Ohm): > -65db
- Class: Switch railed, H
- Power supply: Linear with toroid transformer
- Current draw (120VAC): 1/8 power: 8 ohms: 720W 6 A; 4 ohms: 1,185 W 9.86 A;
- 2 ohms: 1,825 W 15.21 A
- 1/3 power: 8 ohms: 1,835W 15.30 A; 4 ohms: 2,975 W 24.8 A; 2 Ohms 4.535 W 37.8 A
- Thermal emissions 1/3 Power, 4 ohms BTU / hr: 4545
- Cooling: Back to front via 2 variable speed fans
- Input connectors: balanced female XLR,
- Output connectors: Speakon connectors and five-way binding post
- Controls: front panel twin recessed stepped attenuators, circuit breaker/power switch;
- rear panel: mode select, gain select
- LED indicators: Signal presence, ACL (Active clip limiting), Active status, Temp
- Construction: 16-gauge steel chassis, cast aluminum front panel
- Dimensions: 19" W x 3.5" H x 14.875" D, (483 mm x 89 mm x 378 mm)
- Weight: 43.3 lbs. (20 kg)
|
|
|
|
