|
|
|
|
|
The latest from a live sound legend!
Designed with touring sound professionals in mind, the Crest Audio Pro 8200 power amplifier faithfully
produces high power with low distortion in an extremely lightweight economical package. Rock stable in stereo or bridged mode
operation the PRO 8200 is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down
to a 2 Ohms load. The Pro 8200 power amplifier offers the protection that ensures safe & trouble free shows night after night.
The
Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power
ratings in a compact, lightweight 2 rackspace package. Pro 200 Series rack amps feature Automatic Clip Limiting (ACL) to protect
connected drivers; IGM (Instantaneous Gain Modulation) Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled,
high efficiency heat sinks and variable-speed DC fans to limit the operating temperature and extend amplifier life.
Crest Audio PRO 8200 4500W Power Amplifier Features:
- Dramatically reduced net weight
- Latest generation of high speed, wide-bandwidth output devices
- Twin-tunnel cooling with back-to-front air flow
- Dual, rear-mounted, continuous variable-speed fans
- Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection
- Speakon and five-way binding post output connectors
- Ground-lift switch
- Front panel circuit breaker switch
- Modular construction
- Five-year warranty
If you're ready to go for the really good stuff, order the PRO 8200 today.
Crest Audio PRO 8200 4500W Power Amplifier Specifications:
- Model: Pro 8200
- Power Rating: 8 Ohms Stereo - 825 W; 4 Ohms Stereo — 1,450 W; 2 Ohms Stereo — 2,250 W; 8 Ohms Bridged
— 2,900 W; 4 Ohms bridged — 4,500 W
- (8 Ohms and 4 Ohms Stereo Power ratings @1kHz, <0.05% THD+N both channels driven; 2 Ohms s stereo & 4 Ohms s Bridged Mono
Power ratings @1 kHz, <0.
- 1%THD+N)
- Output Voltage RMS: 90V
- Frequency Response:10 Hz — 100 kHz; +0, -2 dB at 1 watt
- Power Bandwidth:
- 10 Hz — 35 kHz; +0, -2 dB at rated 4 Ohms power
- Damping factor: >300:1 8 Ohms s @ 20 Hz to 1kHz
- Input CMRR: > -85 dB @1kHz
- Gain: selectable between x 40 (32 dB) and x 20 (26 dB)
- Input Sensitivity (x 40) 4 Ohms rated power ±3%: 1.87 V
- Input Impedance: 15 kOhms Balanced
- Hum and Noise A-weighted @ 8 Ohms rated power: >-110 dB
- Crosstalk 1kHz @ 8 Ohms rated power: >-70 dB
- Class: H
- Power Supply: Switched Mode
- Current Draw @ 120 VAC: 1/8 power 4 Ohms : 1,250 W 10.5 A; 2 Ohms 1,875 W 15.7 A; 1/3 power 4 Ohms : 3,050 W 25.4 A 2
Ohms ; 4,350 W 36.25 A
- Thermal Emissions: 1/3 power, 4 Ohms Bridged BTU/hr: 14,843
- Cooling: Back to front via 2 variable speed fans
- Input connectors: Balanced female XLR
- Output connectors: Speakon connectors and five-way binding post
- Controls
- Front panel: twin recessed stepped attenuators, circuit breaker/power switch
- Rear panel: mode select, gain select
- LED indicators: Signal presence, ACL (Active clip limiting), Active status, Temp
- Construction: Aluminum Chassis
- Dimensions( W x H x D): 19" x 3.5" x 12.25" - 13.75" to rack ears, (483 mm x 89 mm x 312 mm - 13.75" to rack ears)
- Weight: 24.1 lbs. (11 kg)
|
|
|
|
|
|
|