A versatile, extraordinarily accurate monitor with digital processing.
Measuring 15" x 15" x 15" and featuring a 10" subwoofer, the Equator Q10 Reference Monitor delivers
the power and accuracy of the Q Series speakers. The Q10 enclosure is constructed of 13-ply Baltic birch and is heavily braced
for cabinet rigidity.
All Q Series monitors feature a Zero Point Reference coaxial design with Digitally Controlled
Transducers. The CPU that resides inside each Equator monitor handles a host of formidable tasks, including matching the transducers
as well as seamlessly incorporating the system's crossover approach. This unique no-slope crossover approach reduces the mid-range
distortion commonly associated with conventional coaxial designs to facilitate highly accurate, natural sounding mid-range
reproduction that is never harsh.
The Equator Audio Q monitors also benefit from cutting-edge Digital Signal Processing
technology that helps mix engineers ensure their room is optimized for accurate monitoring. Included with every Equator Q
Series monitor speaker is a software application that enables a mix engineer to manually compensate for acoustic anomalies
such as issues created by speaker placement and boundary conditions within the listening environment. Along with the environmental
compensation, this included software also provides extraordinary control over the monitors, including equalization, mute,
solo, and phase.
Equator Audio Research Q Series Q10 10" Coaxial Reference Monitor Features:
- 10" LF driver
- 1" titanium dome rear-firing compression driver
- Coaxial design
- 500W (LF)/200W (HF) power amplifiers
- DSP control of crossover approach, equalization, mute, solo, and phase
- USB port
- XLR and 1/4" inputs
The Q10 adapts and compensates for the eccentricities of any placing space—order one
to take along today.
Equator Audio Research Q Series Q10 10" Coaxial Reference Monitor Specifications:
- Frequency Response (-6dB): 32Hz - 22kHz
- Recommended Line Level Input: 10mV-2V
- Amplifier Power (LF/HF): 200W/200W
- Amplifier Peak Power (LF/HF): 400W/400W
- Sensitivity: 1w/1m output, 89 dB
- Max SPL (per pair): ≥112dB
- Input Impedance: 10kOhm
- L.F. Driver VC Size: 3"
- L.F. Driver (4-ohm): 10"
- H.F. Driver (8-ohm): 1" Titanium Dome Forward Firing Compression Driver
- Crossover Frequency: 1.8kHz
- Inputs: XLR, USB, RS485 in/thru, 1/4" phone jack
- Protection: Compression (LF & HF), thermal, short circuit, under voltage
- Magnetic Shielding: Yes
Software system requirements:
- Windows: Windows XP and newer
- Mac: OSX 10.4 and newer
- Available USB port
Enclosure Alignment: Bass-Reflex
- Enclosure Construction: 1" HDF baffle & 3/4" 13-layer Baltic Birch
- Finish: Black/Micro-Metallic gray
- Dimensions: 15" W x 15" H x 15" D
- Weight: 54lb.