3 modeled synths, a versatile sound-design environment, plus an FX suite.
Fxpansion DCAM Synth Squad delivers the satisfaction of playing real analog instruments using
software! Advanced modeling technology carefully reconstructs the soul of dusty vintage circuits within your computer, for
the vibe of hardware at a fraction of the cost.
At the heart of DCAM: Synth Squad are 3 modeled synthesizers—Strobe,
Amber and Cypher—bulging with the immense weight and power of old-school analog synths. These are no mere emulations
stunted by the limitations of the past. Instead, these software synths combine the best features from legendary machines with
new and exciting ideas to drag them kicking and screaming into the modern world.
Oscillators ooze immense sound pressure,
amp stages can be overloaded for extra grit, and real-world chaos can be dialed into the circuit for delicious instability.
These synths don't break with extreme settings, so you can abuse them more than you can the real thing. Meanwhile, the intuitive
TransMod modulation system brings your sounds to life in new and expressive ways.
Fusor, a versatile sound-design
environment that can layer and keysplit 3 instances of the DCAM synths, is also included. It provides a variety of ways to
add new dimensions to your sounds with high-quality FX, extra modulation, and an advanced step-sequencer/arpeggiator.
synth with a cutting modern edge
Designed to be as easy to program and satisfying to play as an analog monosynth, Strobe also adds polyphony, osc-stacking,
a versatile multimode filter, and deep modulation to create a modern classic. Strobe specializes in no-nonsense analog-style
leads, sick basses, and complex pads.
Strobe's design is motivated by the immediacy and simplicity of classic performance
synths like the Roland SH101 and SH-09, Oberheim OB-1, and Yamaha CS-10. Such synths are not overly endowed with complex controls—as
a result it's difficult to make a bad sound with them and they beg to be played. Similarly, Strobe features a relatively simple
architecture, allowing you to program great sounds quickly so that you can get on with making music with them.
While Strobe has a single oscillator, it's a very flexible and powerful oscillator. Saw, pulse, and noise waveforms can be
freely mixed alongside sine, triangle, saw, and pulse sub-oscillators. You can set each sub-osc up to 3 octaves below the
main waveforms, and adjust the pulse width of both the main and sub pulse waveforms. You can also sync the osc pitch to the
lowest sub-osc. The osc-stacking feature lets you layer up to 5 copies of the osc and detune them to achieve thick multi-osc
tones without using entire unison voices.
Filter and Amp sections
Strobe's filter is capable of delivering an extremely wide range of timbres, due to its plethora of filter curves and rich
modeled drive circuit for extra-thick tone. As with the other instruments in DCAM: Synth Squad, the amp section can be overloaded,
just like in a real analog synth.
Arpeggiator and direct modulation
Strobe contains a built-in arpeggiator and a range of modulators with flexible gating options—you can gate envelopes
with the LFO, for example. Direct modulation depth controls exist for varying the pitch, pulse width, and filter cutoff from
LFO, envelope, and keytracking sources, allowing you to dial up classic subtractive sounds quickly and efficiently.
your sounds with TransMod
Like the other DCAM synths, Strobe is equipped with the TransMod advanced modulation system, which allows you to modulate
almost any parameter with an extensive range of modulation sources. This takes Strobe's potential way beyond that offered
by the direct modulation controls on the front panel. Apart from offering a huge range of modulation sources, you can also
modulate controls based on active voices and unison voices. Using 2 unison voices and deploying unison modulation instantly
turns Strobe into a dual-osc synth, with a filter and amp for each osc!
Amber—bathed in vintage psychedelia
One of the first attempts to realistically model the divide-down string ensemble synths from the '70s, Amber perfectly captures
the lush, psychedelic sound of these much-loved but often-forgotten instruments. A formant filter, 3 separate chorus models,
a variety of playing responses, and flexible modulation build upon the legacy to deliver a new take on these vintage classics.
sound is derived from a bank of oscillators that are frequency-divided to produce a full keyboard range of 96 notes within
a single synth voice—this means that you can play 96 notes simultaneously. These notes, referred to as 'paraphonic notes',
are then mixed down into a single signal to be fed through conventional polyphonic processing blocks (a single instance within
each synth voice).
Synth and Ensemble sections
Amber includes two sections which both feature very similar paraphonic sources, with the subsequent polyphonic processing
blocks defining their final character. The Synth section is fed through a multimode resonant filter, giving it a synth-like
tone, while the Ensemble section goes through a formant filter and chorus, to impart the character of a string ensemble. The
two sections are mixed together at the final output of the voice, and there are several routing options for the Synth section
which allow it to be fed through the Ensemble section's formant filter and/or chorus.
Both the Synth and Ensemble sections are capable of several playing responses. They can be set to 'paraphonic' mode (96 notes
simultaneously with an envelope and VCA for each note—similar to the Logan String Melody and Korg Lambda), a couple
of modes which can emulate synths with a single envelope/VCA for all paraphonic notes (such as the Eminent Solina and ARP
Omni), and a fully monophonic mode, which dispenses with paraphonic response altogether. With the latter setting on both sections,
you can force Amber to operate as a conventional monophonic/polyphonic synth.
Stack and modulate voices
Unlike vintage hardware string machines, Amber is capable of running with multiple voices and unison. This, combined with
the DCAM TransMod system, offers a potential universe of new, unheard sounds.
Cypher takes analog FM into the future, combining realistic audio-rate modulation with digital luxuries like polyphony and
precise tuning. With dual shaper/filter stages to drive and sculpt the raw output of the oscs, alongside DCAM features like
the TransMod modulation system, Cypher is a tweaker's utopia for producing timbres ranging from visceral mono and poly sounds
to abstract textures and sound effects.
The ethos behind Cypher is to provide a truly accurate model of a synth capable
of analog-style FM, wave modulation, variable-depth sync, and other interesting oscillator processes. The osc section is a
source of vast sonic diversity even before the dual filter section is called into action. Cypher can also be used as a more
conventional 3-osc subtractive synth, for situations when you require more complexity than Strobe can offer.
Cypher's 3 oscillators feature continuously variable waveshapes, ring modulation, white/pink noise sources, and beat-detuning
(which keeps the rate of oscillator-beating the same across the whole keyboard). The real depth of the oscillators lies in
the various ways that they can inter-modulate each other at audio rates. Osc3 can perform FM on Osc2, while Osc2 can modulate
the waveshape of Osc3 at audio-rate frequencies. The osc section features thru-zero FM behaviour and the ability to tune in
precise harmonics, which allows musical digital-style FM sounds rendered with fat-sounding modeled analog oscillators.
osc-sync and audio-rate sample-and-hold
The oscs also feature advanced sync capabilities—Oscs 2 and 3 sync to Osc1 to varying degrees, leading to a range of
'hard' and 'soft' osc-sync sounds. Another innovative feature is the audio-rate sample-and-hold, which quantizes the waveform
of one osc with the frequency of another. The sound is reminiscent of lo-fi digital FM and sampling, but has a unique sound
of its own.
Dual Filters and polyphonic waveshaping
The osc section is fed into two paths, each containing a filter and waveshaper, which can be routed in various ways. The waveshapers
allow you to twist the osc shapes further with several flavors of gritty distortion. The filters are selectable from state-variable
and transistor-ladder models, with rich drive and realistic filter FM.
Fusor—semi-modular sound design
Evoking the era of huge wrap-around analog keyboard rigs, Fusor is a semi-modular layering environment for the DCAM synths
with extra LFOs, envelope followers, step-sequencers, and a suite of high-quality FX. All this, combined with versatile inter-modulation
between its internal devices, makes Fusor an inspirational environment for complex effected patches and deep, experimental
Layering, keysplitting and adding FX
Fusor lets you layer and set up keyboard splits for 3 instances of the DCAM synths. You can add high-quality FX as inserts
on each synth, as aux sends or on the master output. The built-in FX suite includes a licensed version of Overloud Breverb
for high-quality reverb, as well as DCAM circuit-modeled compression, filtering, chorus and overdrive, not to mention an array
of other creative processors for sculpting sounds into new shapes.
Animate your sounds
Animator is Fusor's powerful integrated step-sequencer and arpeggiator device. Offering everything from programmable arpeggio
patterns to complex realtime performance sequencing, Animator brings your synth sounds to life. Dial up inspiring riffs and
hooks in minutes, lay down funky, swung drum machine lines, or simply lose yourself in infinite sonic experimentation. Fusor
also includes a set of extra LFOs and envelope followers to inject further dynamic aspects to your performances.
Fusor's internal modulation system, called FuseMod, opens up semi-modular control possibilities for the various devices in
Fusor. Synths can modulate FX parameters, extra LFOs, or Animator engines—for example, you can modulate a phaser or
clock Animator from a synth LFO. You can even use the envelopes and LFOs from one Fusor-hosted synth to modulate another polyphonically
to create monster semi-modular hybrids.
DCAM: Synth Squad Technology
DCAM: Discrete Component analog Modeling
The philosophy behind DCAM is to model a circuit based on each individual component of the circuit and its structural context,
rather than simply treating a circuit as a black box and analyzing its overall output. The result is a genuinely realistic
model of the circuit—its non-linearities, structure, and behaviour are preserved intact.
What this means to you
is a set of modeled synthesizers with unprecedented vibrancy and realism. You can abuse parameters just like on a hardware
analog synth, and the model responds realistically. Oscs sync convincingly, amp stages can be overloaded, performing FM on
an osc yields rich veins of otherworldly texture, not an ugly digital mess. You don't have to avoid certain settings any more
because they sound bad.
Do not expect perfect, symmetrical waveforms with DCAM: Synth Squad. Imperfect waveforms are
the very essence of a real analog VCO. Drive stages exist at several points in the signal path for organic grit and increased
tonal variation. Meanwhile, complex non-linear filters massage the raw slabs of sound pressure from the oscillators into an
infinite variety of timbres. The results are musically satisfying sounds that inspire you to be creative.
of DCAM: Synth Squad is to provide software synthezisers with real substance—sound sources that sound right, so you
aren't forced to bury them in endless plug-in chains to make them interesting.
The 'analog' control
Each synth has an 'analog' control, which dials in a variable amount of real-world instability into the circuit. The effects
of noise and mains hum are simulated, leading to an edgier sound at lower amounts, to wilder instability at higher settings.
All the DCAM: Synth Squad plug-ins feature individual oversampling settings, both for realtime (normal use) and offline (non-realtime
mixdowns and 'freeze') operation. The default setting for realtime use is 1x, allowing the highest polyphony on as many systems
as possible. For higher-spec CPUs, try 2x oversampling for an even more realistic sound. Users with any CPU can use as high
a value as required for offline oversampling, resulting in exceptional sound quality.
TransMod and FuseMod
DCAM: Synth Squad introduces the TransMod system, offering a more intuitive way of programming complex modulation than a traditional
'mod matrix'. A spectacular range of modulation is possible—the mod source menus include active voice/unison-voice counts
and versatile randomized values in addition to more conventional sources like LFOs and envelopes. You can even harness beating
rates between oscillators as LFOs in Cypher, or load entire presets as parameter modulation amounts for patch-morphing effects.
extends the TransMod concept with the FuseMod system, making DCAM synth modulators available to Fusor's internal FX and LFOs,
as well as to the Animator step-sequencer/arpeggiator. Use synth envelopes and LFOs to clock step-sequencers and modulate
reverbs and granular freezers, and play self-oscillating filters with keyboard sources.
In addition, the TransMod
source menus for Fusor-hosted synths are expanded with modulation sources from other synths and devices in Fusor... so you
can create a super-performance synth with 3 inter-modulating Strobe instances, or complex hybrid textures and soundscapes
with Strobe, Cypher and Amber. The creative possibilities for sound design are limited only by your imagination!
All of the supplied presets offer expressive timbral variation through the use of modulation by keyboard velocity and two
performance controllers (which you can map to aftertouch, mod-wheel, breath, and other MIDI CCs). Fxpansion's team of sound
designers have strived to create dynamic presets full of energy and movement. If you've grown accustomed to flat, boring VA
synth sounds, prepare to be inspired by the possibilities that DCAM: Synth Squad presents.
The DCAM synths introduce
a new type of glide alongside traditional pitch glide. Velocity glide smooths transitions to new notes' velocity modulation
depths, creating rich expressive possibilities. Glide times can also be modulated—if you modulate them with voice/unison-voice
counts, different glide times are possible for each voice. Independent settings for legato glides and envelope retriggering
complete a set of features that allow incredibly flexible and varied playing responses.
DCAM: Synth Squad also includes
a standardized MIDI learn system, and full support for host automation. There is even an integrated program change list so
you can assign presets to MIDI program changes for live performance.
MIDI-controlled audio effects
As well as being supplied as instrument plug-ins, Strobe, Cypher, and Amber are also supplied as MIDI-controlled audio effect
plug-ins, meaning that you can process external audio through them. You can use unison stacking and modulation functions with
the audio and use normal oscillator shapes alongside to create complex textural hybrids. In Cypher, you can even use the external
audio as an audio-rate modulation source for the oscillators. The amp sections must be gated by keyboard input, meaning you
can play the effect plug-ins rhythmically and engage their envelopes and other modulators.
Fxpansion DCAM Synth Squad Virtual Instruments Features:
- StrobeNext-level analog-style performance synth
- Super-oscillator with osc-stacking
- Sub-oscs up to 3 octaves below the main osc
- Filter with rich drive and 22 filter modes
- Built-in arpeggiator
- Advanced TransMod modulation system
- Easy to program, begs to be played
- Stunningly realistic string ensemble synth model
- Ensemble section with formant filter and chorus
- Synth section with multimode resonant filter
- 3 separate circuit-modelled chorus algorithms
- Varied playing responses to emulate various string classics
- Stack and modulate voices with the TransMod system
- 3 advanced oscillators, dual waveshapers and filters
- Continuously variable osc waveforms
- Precision-modelled audio-rate modulation
- Audio-rate FM, wave modulation, sample-and-hold
- Variable-depth oscillator sync
- Ring modulation, beat detune and more
- Built-in arpeggiator, 2 LFOs, 3 envelopes
- Advanced modulation with the TransMod system
- Versatile DCAM sound design environment
- Layer and keysplit 3 DCAM synths
- Add high-quality FX and extra modulation
- Animator: advanced step-sequencer/arpeggiator
- Inter-modulate synths and other devices with FuseMod
- Overloud Breverb algorithms
- Circuit-modeled drive, filtering, and compression
- Amber's chorus and formant filter
- A selection of 4-band processors
- Bitcrusher, granular freezer
- Delay, phaser, flanger and much more
Evoke the era of huge wraparound analog keyboard rigs with this virtual synth package. Order
Fxpansion DCAM Synth Squad Virtual Instruments Specifications:
- System Requirements
- Minimum specs for standalone operation @ 256 samples / 44.1kHz
- Strobe/Amber/Cypher: 2.0GHz Intel Core (or AMD equivalent)
- Fusor: 2.4GHz Intel Core 2 Duo (or AMD equivalent)
- 1GB RAM free
- Windows XP SP3, Vista SP1 (32-bit)
- Mac OSX 10.5.7
- 350MB of hard drive space
- Low-latency audio interface
- DVD-ROM drive
- Internet connection