A convenient UHF wireless system for guitarists with 120 selectable channels and a 300' range.
The Galaxy Audio TRC/GBD Mini Guitar Bud System is a wireless microphone system that features the TRCR
UHF diversity receiver with 120 selectable channels, and an LCD display with channel number, frequency, volume output, and
RF/AF indicators. It also has a Guitar Bud Mini Transmitter. If you like to move around the stage while you're playing guitar
and don't want to worry about tripping over wires or wearing a bulky bodypack, the Guitar Bud Mini Transmitter is an ideal
solution. It's a fixed frequency bud mic with an adjustable 1/4" plug, adjustable gain, an on/off switch, and a low batter
indicator. It has a 135° angle of adjustment so it can work with most guitar body styles.
Galaxy TRC/GBD Mini Guitar Bud Wireless System Features:
- 300' range
- UHF frequency
- Single rackmount included
TRCR
- 120 selectable channels
- LCD display
- AF/RF indicators
- IR Sync
- Diversity antennas
- Squelch adjustment
- XLR/1/4" outputs
Guitar Bud Mini Transmitter
- Fixed frequency
- Gain control
- Operation time: about 7 hours
- Works with most guitar body styles
- On/Off/mute switch
- Gain adjustment
- 5 mW output
- 135° angle of adjustment
- Runs on 1 'AAA' battery
Take advantage of the entire stage — free from cords with this wireless mic system.
Order today!
Galaxy TRC/GBD Mini Guitar Bud Wireless System Specifications:
- System
- Frequency Range: 655~679MHz
- Transmitter Output Level: 10dBm
- Band: UHF
- Operating Range: Under Typical Conditions 300' (92m)
- Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response: +/-3dB 70Hz-16KHz
- Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1%
- Dynamic Range: >90dB A-weighted
- Operating Temperature: Range 14°F to 122°F (-10 C° to +50 C°)
- Note: battery characteristics may limit this range
TRCR
- Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 Ohms load) -12dBV 1/4" connector (into 3KOhms
load) -18dBV
- Output Impedance: XLR connector 200Ohms 1/4" connector 1KOhms
- XLR output: Impedance balanced
- Pin1: Ground (cable shield)
- Pin2: Audio
- Pin3: No Audio
- Sensitivity: -94dBm for 30dB SINAD, typical
- Image Rejection: >80dB
- Dimensions (HxWxD): 1.7" x 8.3" x 6.3", (44mm x 212mm x 160mm)
- Weight: 32.5oz (920g)
- Power Requirements: 12-18 V DC at 400mA, supplied by external power supply