An extremely affordable 4-channel, 120W PA system with 2 full-range, 2-way speakers.

The Harbinger HA120 portable PA system is a ready-to-go 120W system that provides big sound in a simple PA package for small rooms and intimate venues. It includes 4-channel powered mixer, 2 - 12" 2-way speakers, and 2 - 20' speaker cables. All 3 pieces are built with rugged, ozite-covered wood enclosures.

Harbinger HA120 Portable PA System Features:

• 4 mono mic/line input channels with XLR and 1/4" jacks
• 2 full-range, 2-way speakers with real compression drivers
• Built-in 120W power amplifier (max.output)
• Built-in Digital Delay
• Stereo AUX Input for CD or MP3 players with level control
• 3-band master EQ
• Stereo REC Output feeds tape decks, computers, CD burners, etc.
• 2-Band EQ at mono channels
• Record out
• Volume, EQ, and Effect send on every channel
• Built in stand mounts
• Includes 2 - 25' speaker cables
• All housed in rugged cabinets

Order this power amp/2-way speaker combo today!

Harbinger HA120 Portable PA System Specifications:

• Power Amp
• Max Output Power (watts): 8Ω-88
• Minimum Output Power (watts) 4Ω-120
  
  Inputs
• Balanced mono: 4 Mic/line channels, 2 Aux Inputs
  
  Outputs
• Record Out RCA Pair
  
  Channel Strips (4)
• Volume Controls: Rotary
  
  Master Section
• Rotary Fader: Master
  
  Built-in Digital Effect
• Digital Delay (2-150ms)
  
  Noise
• Bandwith-20Hz to 20kHz (line inputs to master output)
• Master output (all faders down): -86dBu
• Power amp output, all faders down: -55dBu
  
  THD
• Power output, 20Hz to 20kHz: 20Hz to 20kHz
• @120W 4Ω <1%
  
  Crosstalk (1KHz@ 0DBU)
• 20Hz to 20kHz bandwidth, channel in to master output
• Channel fader down < -63dB
  
  Frequency response (Mic input to output)
• 20Hz to 20kHz line level o/p @+4dBu into 600Ω +1/-3dB
• 20Hz to 20kHz Power amp o/p 1 watt into 8Ω +1/-3dB
  
  Sensitivity @ Mixer Output +4DBU
• Mic/Line: -50dBu/-35dBu
• Tape in: -6dBu
  
  Channel Equalization
• 2 band ±15dB
• Low EQ: 80Hz
• Hi EQ: 12kHz
  
  Microphone Preamp E.I.N.
• (150Ω terminated, maxgain) -122dBm
  
  Power Requirements
• 120V, 60Hz
  
  Dimensions (WxHxD)
• 18.9"x 8.85"x 5.9"
  
  Weight
• 19 lb.
  
  Speaker Specifications
• RMS Power handling: 80W/8 Ω
• Peak Power handling: 110W/8Ω
• Impedance load: 8Ω
• Horn construction: Compression Driver
• Woofer construction: 12" cone diaphragm
• Magnet weight: 30 oz.
• Crossover; 3.8K / -12dB per octave
• Frequency response: 40Hz-20kHz, SPL 96dB ±2dB
• Max SPL: 116dB
• Dimensions of speaker box (HxWxD): 23.2" x 14.4" x 12.8"