Superb performance and warm, full-bodied sound from the bench of mic design guru, David Royer.

The MA-201 fet is a large diaphragm, phantom-powered, solid-state condenser microphone with a fixed cardioid pattern. With its roots in a lineage of microphone designs by David Royer, one of an elite group of microphone designers who know that music and sound are inseparable from electronic design, the MA-201 FET Microphone offers warm, full-bodied reproductions of vocals and instruments, with none of the shrillness and high frequency distortion artifacts that are often encountered with modern condenser microphones.

Using a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resistors, the MA-201 FET performs at a level reminiscent of some of the best loved classic condenser microphones. Each Mojave MA-201 FET microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shockmount.

Recommended applications:
Vocals Voice Over and Broadcast High SPL sources, such as Kick Drums and Bass Guitar Amps Electric Guitar Piano Drum Overheads, Drum Rooms Acoustic Instruments

Mojave Audio MA-201 FET Large Diaphragm Condenser Microphone Features:

• Hand-selected 3-micron 1" capsule
• Jensen audio transformer
• Military-grade FET
• Custom designed low-noise resistors
• Ultra clean signal path
  
  

Mojave Audio MA-201 FET Large Diaphragm Condenser Microphone Includes:

• An aluminum style carrying case, shockmount and European adapter (fitted to shock mount).

If you're looking for performance that far exceeds price, look no farther than the MA-201 FET.

Mojave Audio MA-201 FET Large Diaphragm Condenser Microphone Specifications:

• Transducer Type: Externally polarized pressure gradient capacitor
• Diaphram: 1-inch diameter, gold sputtered
• Diaphram Thinkness: 3-micron
• Polar Pattern: Cardioid
• Frequency Response: 20 Hz-20kHz, + 3dB
• Sensitivity: -39 dB re. 1V/pa
• Maximum Spl: 125 dB
• Distortion: <1% @120dB SPL, <3% @134dB SPL
• Self Noise: 14dB nominal, not to exceed 16dB (A weighted)
• Impedance: 550 ohms, transformer balanced (Jensen)
• Powering: 48VDC phantom power; current .68mA.
• Dimensions And Weight:
• Carrying case with microphone, shock mount: 10" x 9" x 4.5", 4 lbs.
• Microphone: 7 5/8" x 2", 1 lb.