14 inputs and dual USB jacks gives this 5-channel mixer incredible versatility.
The C3USB DJ mixer with USB was created out of necessity. Today's DJ mixes more types of media than
ever before—vinyl, CD, MP3, and hard disks, as well as karaoke, speeches, and computer slide-shows which create an ever-increasing
complexity. The C3USB builds on Numark's popular mobile DJ mixer design, adding the flexibility of USB for easy, on-the-fly
connection to laptops for audio input and output, and for recording to Mac or PC.
C3USB has two USB ports, each assignable
as an input or output. As inputs, incoming audio can be mixed like any other input. As outputs, you can send your mix out
to a connected computer for recording. Because it employs plug-and-play USB, C3USB connects to almost any Mac or PC with no
drivers needed, and works with nearly all audio playback and recording software.
C3USB features a wide assortment of
input and output connections, a 3-band EQ on each channel and many other features that will make your gigs fun and entertaining—not
tough and frustrating.
Numark C3USB DJ Mixer with USB Features:
- 5-channel rack DJ mixer
- Inputs: 3 phono (RCA), 8 line (RCA), 3 mic (1/4")
- Outputs: Balanced (XLR), Master (RCA), Record (RCA), Zone (RCA), headphone (1/4" stereo)
- Two USB jacks, each assignable to input or output
- USB input for connecting computers for audio input
- USB output for recording gigs to computer
- 3-band EQ each channel
- Microphone channel with EQ
- Replaceable, assignable crossfader
- No software drivers needed for use with Windows XP/Vista or Mac OS X
- Works with almost any audio recording software
Whatever twist the gig throws at you, C3USB has you covered. Order this mixer today.
Numark C3USB DJ Mixer with USB Specifications:
- Inputs:
- Line: 10Kohm input impedance; 77mV rms sensitivity for 1.22V output
- Mic: 600 ohm input impedance unbalanced; 1mv rms sensitivity for 1.22V output; 70mV rms max input
- Phono: 47Kohm input impedance; 1.2mV rms sensitivity @1KHz for 1.22V output
Outputs:
- Line: 9V rms max
- Headphone: 0.5W into 47 ohm
- Distortion: less than 0.01%
Signal-to-Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 98dB
- Mic: Better than 86dB
- Phono: Better than 81dB
Frequency response:
- Line: 20Hz-20KHz ±0.5dB
- Mic: 20Hz-15KHz ± 0.5dB
- Phono: ±1dB except for controlled attenuation of —3dB @ 20Hz to reduce rumble and feedback
- EQ (Channel):
- Bass: +12/-32dB @60Hz
- Middle: +12/-32dB @1.2KHz
- Treble: +10/-28dB @15KH
EQ (Mic):
- Bass: ±10dB @100Hz
- Treble: ±10dB @15KH
Power consumption:
- 11W typical; 14.7W with full headphone output
System requirements for USB functionality:
- PC: Windows XP or Vista
- Mac: OS X
- USB port