The Peavey 4-way dual 15" speaker that provides clear sound, and great frequency range, in a durable design.

The Peavey SP 6 speaker delivers gigantic sound with precision, accuracy, and long-term reliability. It handles up to 4,000 watts peak power. It is a quasi 4-way system that directs low frequencies to both 15" Black Widow woofers, while limiting mid-range frequencies to the top woofer, and 6.5" professional grade mid-range speaker. An RX 22 titanium driver, that is ferrofluid cooled for maximum tweeter performance, and longevity, handles the upper-mids, and high frequencies.

Innovative upgrades
Peavey's exclusive Quadratic Throat Waveguide technology actually reduces horn distortion and aims sound directly at the audience, not over their heads. Peavey's Sound Guard circuitry offers horn and tweeter protection, and works automatically in either full range, or bi-amp modes. The Apen hardwood plywood enclosure, with extensive internal bracing, improves bass response. The SP 6 is finished in the durable Hammertex material, has heavy-duty handles, and a powder-coat grille.

Made in the USA.

Peavey SP 6 4-Way Dual 15" Speaker Features:

• Quasi 4-way full range/bi-ampable sound reinforcement system
• RX 22 compression driver with ferrofluid cooling
• 6.5 inch Pro mid-range with phase plug
• Two 15" BWX Black Widow 4" VC woofers with a Kevlar impregnated cone
• Patented Quadratic Throat CD Waveguide technology used on mid and tweeter
• Aspen hardwood plywood enclosure
• Durable Hammertex finish
• Patented Radialinear Planar Phase Correction System
• Asymmetrical horns aim their coverage patterns 10 degrees upward and 30 degrees downward—directing sound to your audience, not over their heads
• Bi-amp capability via internal wiring jumper
• Sound Guard III tweeter and mid-range protection
• Full-range inputs now include a Neutrik Speakon four-pin jack along with two 1/4" phone jacks
• Stand-mount adapter
  
  Made in the USA

Improve your sound, and performance with these great speakers. Order yours today!

Peavey SP 6 4-Way Dual 15" Speaker Specifications:

• Frequency response, 1 meter on-axis,
• swept-sine in anechoic environment:
• 50 Hz to 15 kHz (±3 dB)
  
  Usable low frequency limit
• (-10 dB point):
• 42 Hz
  
  Power handling:
  
  Full range:
• 1,000W continuous
• 2,000W program
• 4,000W peak
• Low frequency section:
• 1,000W continuous
• 2,000W program
• 4,000W peak
• Passive mid / High frequency section:
• 150W continuous
• 300W program
• 600W peak
  
  Sound pressure level, 1W,
• 1 meter in anechoic environment:
  
  Full range:
• 99 dB SPL (2.0 V input)
• Low frequency section:
• 100 dB SPL (2.0 V input)
• Mid/high frequency section:
• 98 dB SPL (2.0 V input)
  
  Maximum sound pressure level
• (1 meter):
  
  Full range:
• 129 dB SPL continuous
• 135 dB SPL peak
• Low frequency section:
• 130 dB SPL continuous
• 136 dB SPL peak
• Passive mid/high frequency
• section:
• 121 dB SPL continuous
• 127 dB SPL peak
  
  Radiation angle measured at -6 dB point of polar response:
• 90° horizontal by 40° vertical
• The vertical main polar lobe is
• angled down 10° with respect to
• straight ahead being +10, -30°
  
  Transducer complement:
  
  Low frequency section:
• 2x 15" woofer, vented
• 1508-8 HE SF
• Mid frequency section:
• 1"x6.5" pro mid-range on an asymmetrical quadratic throat CD horn
• High frequency section:
• 1"x .875" exit /51mm voice coil
• RX 22 compression driver
• on an asymmetrical Quadratic throat CD horn
  
  Box tuning frequency:
• Low Frequency Section: 52 Hz
  
  Crossover frequency
• (internal passive):
• Bottom woofer: 250 Hz
• Low / Mid frequency:
• 650 Hz
• Mid / High frequency:
• 2100 Hz
  
  Recommended Active Crossover
• Frequency Region and Slope:
• Low Frequency — High Frequency:
• 500 Hz at 12 dB / octave
  
  Time Offset:
• Low Frequency: 0.0 ms
• Mid/High Frequency: 0.58 ms
  
  Impedance (Z):
• Full Range:
• Nominal: 4.0 Ohms
• Minimum: 3.5 Ohms
• Low Frequency:
• Nominal: 4.0 Ohms
• Minimum: 3.2 Ohms
• Passive HF:
• Nominal: 4.0 Ohms
• Minimum: 3.7 Ohms
  
  Input connections:
• Full Range: two 1/4" phone jacks,
• one Neutrik four-pin Speakon jack
• & bi-amp capability provided via an
• internal wiring jumper
  
  Enclosure materials and finish:
• Aspen enclosure
• Hammertex finish
• Mounting provisions:
• This unit is not designed for overhead suspension. It has four large rubber feet on bottom for floor use
  
  Dimensions (H x W x D):
• Front:
• 54.38" x 20.55" x 23.00"
• 1381 mm x 522 mm x 584 mm
• Rear:
• 54.38" x 12.63" x 23.00"
• 1381 mm x 321 mm x 584 mm
• Net Weight:
• 141 lbs. (64.0 kg)