Add 8 affordable, pro-quality preamps to your DAW.

The EP84 is the latest multichannel microphone preamplifier from SM Pro Audio. Packed with quality features and connectivity options, this sturdy 2RU rack-mountable unit is designed to provide studio users with 8 channels of clean and accurate microphone preamplification. The EP84 is an excellent front end for computer audio systems, stand-alone hard disk recorders, or just about any other analog or digital workstation.

With all the functionality of a top line preamplifier, the EP84 features independent variable gain control, -20dB pad, phase reverse, low cut filters, 48v Phantom power, and insert points on each of the eight (8) channels.

Each mic-pre provides some 60dB of gain with a massive 23db of maximum output.
Eight (8) ADAT format channel outputs can be added to the EP84 via installation of the optional PR8IIA ADAT output module. With this simple user installed option, the EP84 integrates superbly into today's digital studio environments without a hitch. Great for connection to the latest ADAT compatible audio interfaces, the EP84 expands your recording possibilities — you can even mic up the whole band!
Note: The analog outputs (both +4dB XLR & -10dB TS) and the digital ADAT ouput (when fitted with the PR8IIA output module) operate simultaneously.

SM Pro Audio EP-84 Multichannel Microphone Preamplifier Features:

• 8 x discrete microphone preamplifiers
• Modular PCB design
• Ultra-wide dynamic range
• Low-noise operating levels
• 48V phantom power per channel
• -20dB pad per channel
• Phase reverse per channel
• Gain control per channel
• Peak light per channel
• 80Hz low-cut filter per channel
• Insert points per channel

Boost the audio performance of your DAW and mic your entire band to boot. Add an EP-84 with the ADAT output option to your rig.

SM Pro Audio EP-84 Multichannel Microphone Preamplifier Specifications:

• Mic Input
• Connector: XLR combo
• Type: Balanced
• Impedance: 47K ohms
• Min sensitivity: -60dB
• Peak input level: +9.5dB
  
  Line Input:
• Type: Balanced 1/4" on combo
• Impedance: 47K
• Min sensitivity: -35dB
• Peak input level: +32dB
  
  Output
• Connector: 1/4 jack, XLR
• Type: unbalanced, balanced
• Impedance: 600 Ohms
• Peak output level: +23dB
• Frequency response: 20Hz- 20KHz 0dB- -0.5dB
• Distortion: 0.005%
• S/N: > 105dB
• Crosstalk rejection: >120dB @1KHz; -20dB input
• Max Gain: 58dB